Hi;
My boot and restart take a long time to boot. The boot log shows
several apparent errors. It seems to have started having problems a day
ago. However, it could have been a few days earlier when I installed
compiz and tigervnc. Everything seems to work fine after I have logged
in.
If I were to file a bug, which Fedora 12 component should I file it
with ?
I am using the latest updates.
Included is my boot.log for today.
%G Welcome to [0;34mFedora[0;39m
Press 'I' to enter interactive startup.
Starting udev: %G[60G[[0;32m OK [0;39m]
Setting hostname CASE: [60G[[0;32m OK [0;39m]
mdadm: No arrays found in config file or automatically
Setting up Logical Volume Management: [60G[[0;32m OK [0;39m]
Checking filesystems
/dev/sdb2: clean, 232309/1272960 files, 1954829/5082564 blocks
/dev/sdb1: clean, 41/64256 files, 48232/257008 blocks
/dev/sdb3: clean, 57674/28164096 files, 2205479/112639747 blocks
[60G[[0;32m OK [0;39m]
Remounting root filesystem in read-write mode: [60G[[0;32m
OK [0;39m]
Mounting local filesystems: [60G[[0;32m OK [0;39m]
Enabling local filesystem quotas: [60G[[0;32m OK [0;39m]
Enabling /etc/fstab swaps: [60G[[0;32m OK [0;39m]
Entering non-interactive startup
Applying Intel CPU microcode update: WARNING: Deprecated config
file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking kmods exist for 2.6.31.9-174.fc12.x86_64[60G[[0;32m
OK [0;39m]
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
Enabling ondemand cpu frequency scaling: [60G[[0;32m OK [0;39m]
ip6tables: Applying firewall rules: WARNING: Deprecated config
file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
[60G[[0;32m OK [0;39m]
ip6tables: Loading additional modules: nf_conntrack_netbios_ns
[60G[[0;32m OK [0;39m]
iptables: Applying firewall rules: [60G[[0;32m OK [0;39m]
iptables: Loading additional modules: nf_conntrack_netbios_ns
[60G[[0;32m OK [0;39m]
Checking for module nvidia.ko: [60G[[0;32m OK [0;39m]
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 520: 932
Segmentation fault "$@"
[60G[[0;31mFAILED[0;39m]
Starting portreserve: [60G[[0;32m OK [0;39m]
Starting system logger: [60G[[0;32m OK [0;39m]
Starting irqbalance: [60G[[0;32m OK [0;39m]
Starting rpcbind: [60G[[0;32m OK [0;39m]
Starting system message bus: [60G[[0;32m OK [0;39m]
Starting Avahi daemon... [60G[[0;32m OK [0;39m]
Starting NFS statd: [60G[[0;32m OK [0;39m]
Starting RPC idmapd: WARNING: Deprecated config file /etc/modprobe.conf,
all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
[60G[[0;32m OK [0;39m]
Starting cups: [60G[[0;32m OK [0;39m]
Starting acpi daemon: [60G[[0;32m OK [0;39m]
Starting HAL daemon: [60G[[0;32m OK [0;39m]
Starting PC/SC smart card daemon (pcscd): [60G[[0;32m OK [0;39m]
Setting network parameters... [60G[[0;32m OK [0;39m]
Starting NetworkManager daemon: [60G[[0;32m OK [0;39m]
Starting sshd: [60G[[0;32m OK [0;39m]
Starting xinetd: [60G[[0;32m OK [0;39m]
Starting sendmail: [60G[[0;32m OK [0;39m]
Starting sm-client: [60G[[0;32m OK [0;39m]
Starting abrt daemon: [60G[[0;32m OK [0;39m]
Starting crond: [60G[[0;32m OK [0;39m]
[60G[[0;32m OK [0;39m]
Enabling monthly Smolt checkin: [60G[[0;32m OK [0;39m]
Starting VNC server: 1:bill
WARNING: The first attempt to start Xvnc failed, possibly because the X
Font
Server is not running and this system does not use a font catalog.
Attempting
to determine an appropriate font path for this system and restart Xvnc
using
that font path ...
Could not start Xvnc.
[mi] Extension "RANDR-geometry" is not recognized
[mi] Only the following extensions can be run-time disabled:
[mi] Generic Events
[mi] DAMAGE
[mi] DOUBLE-BUFFER
[mi] DPMS
[mi] GLX
[mi] MIT-SCREEN-SAVER
[mi] MIT-SHM
[mi] RANDR
[mi] RENDER
[mi] X-Resource
[mi] XFree86-DRI
[mi] XFIXES
[mi] XInputExtension
[mi] XKEYBOARD
[mi] XTEST
[mi] XVideo
Unrecognized option: 1024x768
use: X [:<display>] [option]
-a # mouse acceleration (pixels)
-ac disable access control restrictions
-audit int set audit trail level
-auth file select authorization file
-br create root window with black background
+bs enable any backing store support
-bs disable any backing store support
-c turns off key-click
c # key-click volume (0-100)
-cc int default color visual class
-core generate core dump on fatal error
-dpi int screen resolution in dots per inch
dpms enables VESA DPMS monitor control
-dpms disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f # bell base (0-100)
-fc string cursor font
-fn string default font name
-fp string default font path
-help prints message with these options
-I ignore all remaining arguments
-ld int limit data space to N Kb
-lf int limit number of open files to N
-ls int limit stack space to N Kb
-logo enable logo in screen saver
nologo disable logo in screen saver
-nolisten string don't listen on protocol
-noreset don't reset after last client exists
-nr create root window with no background
-reset reset after last client exists
-p # screen-saver pattern duration (minutes)
-pn accept failure to listen on all ports
-nopn reject failure to listen on all ports
-r turns off auto-repeat
r turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro start with classic stipple and cursor
-s # screen-saver timeout (minutes)
-t # mouse threshold (pixels)
-terminate terminate at server reset
-to # connection time out
-tst disable testing extensions
ttyxx server started from init on /dev/ttyxx
v video blanking for screen-saver
-v screen-saver without video blanking
-wm WhenMapped default backing-store
-wr create root window with white background
-x string loads named extension at init time
-maxbigreqsize set maximal bigrequest size
-dumbSched Disable smart scheduling, enable old behavior
-schedInterval int Set scheduler interval in msec
+extension name Enable extension
-extension name Disable extension
-query host-name contact named host for XDMCP
-broadcast broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name contact named host for indirect XDMCP
-port port-num UDP port number to send messages to
-from local-address specify the local address to connect from
-once Terminate server after one session
-class display-class specify display class to send in manage
-cookie xdm-auth-bits specify the magic cookie for XDMCP
-displayID display-id manufacturer display ID for request
-kb disable the X Keyboard Extension
+kb enable the X Keyboard Extension
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
enable/disable accessx key sequences
-ardelay set XKB autorepeat delay
-arinterval set XKB autorepeat interval
Xvnc TigerVNC 1.0.0 - built Oct 26 2009 10:58:46
Copyright (C) 2002-2005 RealVNC Ltd.
Copyright (C) 2000-2006 Constantin Kaplinsky
Copyright (C) 2004-2009 Peter Astrand for Cendio AB
See http://www.tigervnc.org for information on TigerVNC.
Underlying X server release 10603901,
-screen scrn WxHxD set screen's width, height, depth
-pixdepths list-of-int support given pixmap depths
+/-render turn on/off RENDER extension support(default on)
-linebias n adjust thin line pixelization
-blackpixel n pixel value for black
-whitepixel n pixel value for white
-shmem put framebuffers in shared memory
-geometry WxH set screen 0's width, height
-depth D set screen 0's depth
-pixelformat fmt set pixel format (rgbNNN or bgrNNN)
-inetd has been launched from inetd
VNC parameters:
Parameters can be turned on with -<param> or off with -<param>=0
Parameters which take a value can be specified as -<param> <value>
Other valid forms are <param>=<value> -<param>=<value>
--<param>=<value>
Parameter names are case-insensitive. The parameters are:
Global Parameters:
localhost - Only allow connections from localhost (default=0)
desktop - Name of VNC desktop (default=x11)
rfbport - TCP port to listen for RFB protocol (default=0)
rfbwait - Alias for ClientWaitTimeMillis
httpPort - TCP port to listen for HTTP (default=0)
httpd - Directory containing files to serve via HTTP
(default=)
rfbauth - Alias for PasswordFile
QueryConnectTimeout - Number of seconds to show the Accept Connection
dialog
before rejecting the connection (default=10)
AlwaysSetDeferUpdateTimer - Always reset the defer update timer on
every
change (default=0)
DeferUpdate - Time in milliseconds to defer updates (default=1)
Log - Specifies which log output should be directed to
which
target logger, and the level of output to log. Format
is
<log>:<target>:<level>[, ...]. (default=)
QueryConnect - Prompt the local user to accept or reject incoming
connections. (default=0)
SendCutText - Send clipboard changes to clients. (default=1)
AcceptCutText - Accept clipboard updates from clients. (default=1)
AcceptPointerEvents - Accept pointer press and release events from
clients.
(default=1)
AcceptKeyEvents - Accept key press and release events from clients.
(default=1)
DisconnectClients - Disconnect existing clients if an incoming
connection is
non-shared. If combined with NeverShared then new
connections will be refused while there is a client
active
(default=1)
NeverShared - Never treat incoming connections as shared,
regardless of
the client-specified setting (default=0)
AlwaysShared - Always treat incoming connections as shared,
regardless of
the client-specified setting (default=0)
Protocol3.3 - Always use protocol version 3.3 for backwards
compatibility
with badly-behaved clients (default=0)
CompareFB - Perform pixel comparison on framebuffer to reduce
unnecessary updates (default=1)
ClientWaitTimeMillis - The number of milliseconds to wait for a client
which
is no longer responding (default=20000)
MaxIdleTime - Terminate after s seconds of user inactivity
(default=0)
MaxConnectionTime - Terminate when a client has been connected for s
seconds
(default=0)
MaxDisconnectionTime - Terminate when no client has been connected for
s
seconds (default=0)
IdleTimeout - The number of seconds after which an idle VNC
connection
will be dropped (zero means no timeout) (default=0)
Password - Obfuscated binary encoding of the password which
clients
must supply to access the server (default=)
PasswordFile - Password file for VNC authentication (default=)
ReverseSecurityTypes - Specify encryption scheme to use for reverse
connections (None) (default=None)
SecurityTypes - Specify which security scheme to use for incoming
connections (None, VncAuth) (default=VncAuth)
BlacklistTimeout - The initial timeout applied when a host is first
black-listed. The host cannot re-attempt a
connection until
the timeout expires. (default=10)
BlacklistThreshold - The number of unauthenticated connection
attempts
allowed from any individual host before that host is
black-listed (default=5)
ImprovedHextile - Use improved compression algorithm for Hextile
encoding
which achieves better compression ratios by the cost
of
using more CPU time (default=1)
RemapKeys - Comma-separated list of incoming keysyms to remap.
Mappings
are expressed as two hex values, prefixed by 0x, and
separated by -> (default=)
ZlibLevel - Zlib compression level (default=-1)
MaxCutText - Maximum permitted length of an incoming clipboard
update
(default=262144)
Fatal server error:
Unrecognized option: 1024x768
[mi] Extension "RANDR-geometry" is not recognized
[mi] Only the following extensions can be run-time disabled:
[mi] Generic Events
[mi] DAMAGE
[mi] DOUBLE-BUFFER
[mi] DPMS
[mi] GLX
[mi] MIT-SCREEN-SAVER
[mi] MIT-SHM
[mi] RANDR
[mi] RENDER
[mi] X-Resource
[mi] XFree86-DRI
[mi] XFIXES
[mi] XInputExtension
[mi] XKEYBOARD
[mi] XTEST
[mi] XVideo
Unrecognized option: 1024x768
use: X [:<display>] [option]
-a # mouse acceleration (pixels)
-ac disable access control restrictions
-audit int set audit trail level
-auth file select authorization file
-br create root window with black background
+bs enable any backing store support
-bs disable any backing store support
-c turns off key-click
c # key-click volume (0-100)
-cc int default color visual class
-core generate core dump on fatal error
-dpi int screen resolution in dots per inch
dpms enables VESA DPMS monitor control
-dpms disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f # bell base (0-100)
-fc string cursor font
-fn string default font name
-fp string default font path
-help prints message with these options
-I ignore all remaining arguments
-ld int limit data space to N Kb
-lf int limit number of open files to N
-ls int limit stack space to N Kb
-logo enable logo in screen saver
nologo disable logo in screen saver
-nolisten string don't listen on protocol
-noreset don't reset after last client exists
-nr create root window with no background
-reset reset after last client exists
-p # screen-saver pattern duration (minutes)
-pn accept failure to listen on all ports
-nopn reject failure to listen on all ports
-r turns off auto-repeat
r turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro start with classic stipple and cursor
-s # screen-saver timeout (minutes)
-t # mouse threshold (pixels)
-terminate terminate at server reset
-to # connection time out
-tst disable testing extensions
ttyxx server started from init on /dev/ttyxx
v video blanking for screen-saver
-v screen-saver without video blanking
-wm WhenMapped default backing-store
-wr create root window with white background
-x string loads named extension at init time
-maxbigreqsize set maximal bigrequest size
-dumbSched Disable smart scheduling, enable old behavior
-schedInterval int Set scheduler interval in msec
+extension name Enable extension
-extension name Disable extension
-query host-name contact named host for XDMCP
-broadcast broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name contact named host for indirect XDMCP
-port port-num UDP port number to send messages to
-from local-address specify the local address to connect from
-once Terminate server after one session
-class display-class specify display class to send in manage
-cookie xdm-auth-bits specify the magic cookie for XDMCP
-displayID display-id manufacturer display ID for request
-kb disable the X Keyboard Extension
+kb enable the X Keyboard Extension
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
enable/disable accessx key sequences
-ardelay set XKB autorepeat delay
-arinterval set XKB autorepeat interval
Xvnc TigerVNC 1.0.0 - built Oct 26 2009 10:58:46
Copyright (C) 2002-2005 RealVNC Ltd.
Copyright (C) 2000-2006 Constantin Kaplinsky
Copyright (C) 2004-2009 Peter Astrand for Cendio AB
See http://www.tigervnc.org for information on TigerVNC.
Underlying X server release 10603901,
-screen scrn WxHxD set screen's width, height, depth
-pixdepths list-of-int support given pixmap depths
+/-render turn on/off RENDER extension support(default on)
-linebias n adjust thin line pixelization
-blackpixel n pixel value for black
-whitepixel n pixel value for white
-shmem put framebuffers in shared memory
-geometry WxH set screen 0's width, height
-depth D set screen 0's depth
-pixelformat fmt set pixel format (rgbNNN or bgrNNN)
-inetd has been launched from inetd
VNC parameters:
Parameters can be turned on with -<param> or off with -<param>=0
Parameters which take a value can be specified as -<param> <value>
Other valid forms are <param>=<value> -<param>=<value>
--<param>=<value>
Parameter names are case-insensitive. The parameters are:
Global Parameters:
localhost - Only allow connections from localhost (default=0)
desktop - Name of VNC desktop (default=x11)
rfbport - TCP port to listen for RFB protocol (default=0)
rfbwait - Alias for ClientWaitTimeMillis
httpPort - TCP port to listen for HTTP (default=0)
httpd - Directory containing files to serve via HTTP
(default=)
rfbauth - Alias for PasswordFile
QueryConnectTimeout - Number of seconds to show the Accept Connection
dialog
before rejecting the connection (default=10)
AlwaysSetDeferUpdateTimer - Always reset the defer update timer on
every
change (default=0)
DeferUpdate - Time in milliseconds to defer updates (default=1)
Log - Specifies which log output should be directed to
which
target logger, and the level of output to log. Format
is
<log>:<target>:<level>[, ...]. (default=)
QueryConnect - Prompt the local user to accept or reject incoming
connections. (default=0)
SendCutText - Send clipboard changes to clients. (default=1)
AcceptCutText - Accept clipboard updates from clients. (default=1)
AcceptPointerEvents - Accept pointer press and release events from
clients.
(default=1)
AcceptKeyEvents - Accept key press and release events from clients.
(default=1)
DisconnectClients - Disconnect existing clients if an incoming
connection is
non-shared. If combined with NeverShared then new
connections will be refused while there is a client
active
(default=1)
NeverShared - Never treat incoming connections as shared,
regardless of
the client-specified setting (default=0)
AlwaysShared - Always treat incoming connections as shared,
regardless of
the client-specified setting (default=0)
Protocol3.3 - Always use protocol version 3.3 for backwards
compatibility
with badly-behaved clients (default=0)
CompareFB - Perform pixel comparison on framebuffer to reduce
unnecessary updates (default=1)
ClientWaitTimeMillis - The number of milliseconds to wait for a client
which
is no longer responding (default=20000)
MaxIdleTime - Terminate after s seconds of user inactivity
(default=0)
MaxConnectionTime - Terminate when a client has been connected for s
seconds
(default=0)
MaxDisconnectionTime - Terminate when no client has been connected for
s
seconds (default=0)
IdleTimeout - The number of seconds after which an idle VNC
connection
will be dropped (zero means no timeout) (default=0)
Password - Obfuscated binary encoding of the password which
clients
must supply to access the server (default=)
PasswordFile - Password file for VNC authentication (default=)
ReverseSecurityTypes - Specify encryption scheme to use for reverse
connections (None) (default=None)
SecurityTypes - Specify which security scheme to use for incoming
connections (None, VncAuth) (default=VncAuth)
BlacklistTimeout - The initial timeout applied when a host is first
black-listed. The host cannot re-attempt a
connection until
the timeout expires. (default=10)
BlacklistThreshold - The number of unauthenticated connection
attempts
allowed from any individual host before that host is
black-listed (default=5)
ImprovedHextile - Use improved compression algorithm for Hextile
encoding
which achieves better compression ratios by the cost
of
using more CPU time (default=1)
RemapKeys - Comma-separated list of incoming keysyms to remap.
Mappings
are expressed as two hex values, prefixed by 0x, and
separated by -> (default=)
ZlibLevel - Zlib compression level (default=-1)
MaxCutText - Maximum permitted length of an incoming clipboard
update
(default=262144)
Fatal server error:
Unrecognized option: 1024x768
[60G[[0;31mFAILED[0;39m]
Starting atd: [60G[[0;32m OK [0;39m]
[60G[[0;32m OK [0;39m]
--
Regards Bill
Fedora 12, Gnome 2.28
Evo.2.28, Emacs 23.1.1
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
