Hi,
I've just added a new hp array to my server and when looking in dmesg
I can see the following:
scsi0 : ioc0: LSISAS1068E B3, FwRev=01192100h, Ports=1, MaxQ=343, IRQ=185
Vendor: HP Model: MSA2012sa Rev: J300
Type: Enclosure ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:17:00.0[A] -> GSI 19 (level, low) -> IRQ 98
mptbase: ioc1: Initiating bringup
ioc1: LSISAS1068E B3: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:17:00.0 to 64
scsi1 : ioc1: LSISAS1068E B3, FwRev=01192100h, Ports=1, MaxQ=343, IRQ=98
Vendor: HP Model: MSA2012sa Rev: J300
Type: Enclosure ANSI SCSI revision: 05
HP CISS Driver (v 3.6.20-RH2)
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 185
cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 130 using DAC
blocks= 143305920 block_size= 512
heads= 255, sectors= 32, cylinders= 17562
blocks= 143305920 block_size= 512
heads= 255, sectors= 32, cylinders= 17562
cciss/c0d0: p1 p2
libata version 3.00 loaded.
Initializing USB Mass Storage driver...
mount
/dev/mapper/VolGroup00-LogVolRoot on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/mapper/VolGroup00-LogVolVar on /var type ext3 (rw)
/dev/mapper/VolGroup00-LogVolTmp on /tmp type ext3 (rw)
/dev/mapper/VolGroup00-LogVolUsr on /usr type ext3 (rw)
/dev/cciss/c0d0p1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
My question is how can I tell where the partition on the array is
mapped to on my server?
Thanks in advance.
Dan
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
