On Sat, 27 Jun 2009 13:22:24 +0000, Andy Campbell wrote: > On Sat, 27 Jun 2009 14:14:39 +0100, Alan Cox wrote: > > >> Does feel like hardware or a BIOS setup failure of some sort - is the >> IDE/AHCI controller on the mainboard or a plug in card ? - Have you >> checked the box for BIOS updates and also tried resetting to >> the BIOS safe defaults and retesting ? > > > Main board ... > > 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA > AHCI Controller (prog-if 01 [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Flags: bus > master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 9c00 > [size=8] > I/O ports at 9880 [size=4] > I/O ports at 9800 [size=8] > I/O ports at 9480 [size=4] > I/O ports at 9400 [size=32] > Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: > <access denied> > Kernel driver in use: ahci > > I'll try reseting the BIOS to defaults. > > Strangely I'm trying to reproduce a plain text file (370Mb), so I can > see how corrupt the file gets ( easier to diff ) and its copied fine 64+ > times so just seems to be binary files. > > Thanks for taking an interest. Safe/Default BIOS config still has the problem - only change to the BIOS was hard drive order to keep GAG ( Boot loader happy ) still can't get the text file to fail to copy - I'll leave it running in a loop. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
