On Fri, 19 Jun 2009 16:22:59 -0500 Mike McCarty <Mike.McCarty@xxxxxxxxxxxxx> wrote: > > $ cat /etc/modules.conf > # I2C module options > alias char-major-89 i2c-dev > #options parport_pc io=0x378 irq=7 dma=3 > options parport_pc io=0x378 irq=7 When I looked at my file, I realized I've been giving you bad information. The file in /etc is modprobe.conf, not modules.conf. Here is how you set it options snd cards_limit=8 alias snd-card-0 snd-ice1724 <---- replace snd-ice1724 with your card options snd-ice1724 index=0 <---- should be snd-via32xx for you alias snd-card-1 snd-ck8s <---- you can delete these two options snd-ck8s index=1 <---- lines. alias snd-card-7 snd-usb-audio <---- this doesn't hurt anything options snd-usb-audio index=7 <---- so you can leave it This info is also in the alsa-info.sh output. > > I don't see anything in there about sound cards at all. > Maybe I need to add another alias or something in there. I could try > pulling that file from a backup, and see what it used to look like. > > The output of aplay was, to say the least, verbose, being 249 lines. > What part of it is significant? The part that says card 0. It will tell you which device is considered card 0 and thus default. What you want to see is that the via is card 0, and not the modem device. This info is also in the alsa-info.sh output. 249 lines. Wow! With two cards my system is just over one screen. Try just aplay -l $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Revolution51 [M Audio Revolution-5.1], device 0: ICE1724 [ICE1724] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Revolution51 [M Audio Revolution-5.1], device 1: ICE1724 IEC958 [ICE1724 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Revolution51 [M Audio Revolution-5.1], device 2: ICE1724 Surrounds [ICE1724 Surround PCM] Subdevices: 3/3 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 card 1: CK8S [NVidia CK8S], device 0: Intel ICH [NVidia CK8S] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CK8S [NVidia CK8S], device 2: Intel ICH - IEC958 [NVidia CK8S - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 So my default device is the ICE1724. You want to see VIA32xx as card 0. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
