Here is a continuation of my efforts. I really appreciate the help. ---------------------------------------------------------------------------- >Patrick wrote: > Did you try another browser to see if it works with the other sites? I installed and tried Dillo. It said "Query sent Waiting for reply" ---------------------------------------------------------------------------- > Rick Stevens wrote > Here's one way to troubleshoot it: > Using FireFox, see if you can get to the cable modem's GUI interface. > Most of them will have one of the following four IPs as their default: > 192.168.0.1 > 192.168.0.254 > 192.168.1.1 > 192.168.1.254 tried all of those with no luck > The first thing you should do is make sure your NIC can access all of > those addresses without using a gateway. As root in a console: > ifconfig eth0 192.168.0.128 netmask 255.255.0.0 > This puts your computer on the class B (CIDR /16) network of 192.168.0.0 > and you should be able to hit any of the above four addresses directly > (in fact, any IP from 192.168.0.1 through 192.168.255.254). >Next, try "http://192.168.0.1" and see if you get the modem's GUI. If > you don't, try the other three IPs above. If it's none of those, check > the manual for the modem and see what the default LAN IP is. Make sure > you get the LAN IP, _NOT_ the WAN IP (anything on the WAN side is the > cable company's side of the connection). tried all the above, with no luck. The manual does not mention a "LAN IP" that I can find. It does not mention a GUI. > If you can browse the IP, then you know that at least your machine and > your modem can communicate. Wander through the modem's user interface > looking for its DHCP server settings. Make sure the DHCP server is > enabled and take note of which addresses it will offer (usually called > the "pool"). > At this point, you should be able to have the modem give you an IP. >Make sure your system is set up to fetch an IP address via DHCP and > either reboot your system, restart NetworkManager (if you use it): > service NetworkManager restart > Once that's all done, again as root in a console, do: > ifconfig eth0 > and verify it has an IP address that's in the range described by the > pool data you got before. If that's all good, do: > netstat -rn It returned "Forwarding is ON or its state is unknown (5). OK, No RDISC. Missing IP address argument." it returned: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 > and verify that the line that contains the flags "UG" is the same > IP as the cable modem. Example: > 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0 > ^^^^^^^^^^^^^ > IP of cable modem > If all that checks out, then you SHOULD have a live connection to the > Internet. The last thing to check is your /etc/resolv.conf file and > ensure that the "nameserver" lines have legitimate IP addresses for > live DNS servers. This should be set up when the DHCP server gives you > the IP address and default route, but not always. If it doesn't set > this up, you could manually add entries. Here's a couple of entries you > can use: > nameserver 208.67.222.222 > nameserver 208.67.220.220 I tried adding those to the top of the list of nameservers, and restarted firefox - no change . I then rebooted and they sre gone from resolv.conf again. Hope that helps a bit. ---------------------------------------------------------------------- - Rick Stevens, Systems Engineer ricks@xxxxxxxx - - AIM/Skype: therps2 ICQ: 22643734 Yahoo: origrps2 - - - - Microsoft Windows: Proof that P.T. Barnum was right - ---------------------------------------------------------------------- I am still stuck. I seem to have a dedicated Google machine. I can check my mail at gmail.com, including loading messages ( I haven't tried to send one yet) The google search in Firefox works fine. GoogleEarth wiorks well -- and I still can't reach any other sites: And it all works fairly well in Windows XP ( it is still Windows! winipcfg doesn't work. There is a screwed up .dll, apparently ) It seems to me that it might be in the nameserver somewhere. I suspect the modem maker did something odd in the driver and furnished it to Microsoft and won't release it now. I saw that the USBnet programmers do not have a driver for this modem. How can it work OK with google and have a configuration problem in my setup? ------------------------------ |
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
