|
Unfortunately for me, wpa_supplicant is not able to associate. I have compiled the ralink driver to have the values HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT=y according to their README_STA file. wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -ira0 -Dwext -f /var/log/...etc is unable to associate. In fact it is unable to associate no matter what combinations I compile the driver as far as the 2 definitions above are concerned. I sent email to FAE@xxxxxxxxxxxxxx and still no reply. I will not hold my breath for these guys to respond. So, I guess, I will have to look around for a mini-pci card that supports 801.11 N Draft 2, AND is supported by a released fedora driver. If anyone can make a suggestion which mini-pci card will meet this requirement, I would be greatful. Cheers, MK > From: frank@xxxxxxxxxxxx > To: fedora-list@xxxxxxxxxx > Date: Thu, 11 Jun 2009 08:44:22 +0200 > Subject: RE: Wireless networking - should I install Ralink driver? Solved > > Frank Millman wrote: > > > > Kevin Kofler wrote: > > > > > > Frank Millman wrote: > > > > My next step was going to be to install the Ralink driver > > > downloaded from > > > > their site, but I thought I would check here first to see > > > if there are any > > > > other suggestions. > > > > > > The driver from the Ralink site is legacy, I'm not even sure > > > they still > > > update it at all, given that the rewritten driver from the > > > rt2x00 project > > > (which is what you're getting by default) is now in the > > kernel itself. > > > > > > > Thanks for the info, Kevin. I am glad I checked here first. > > > > Does anyone have any other suggestions? To recap, here is the > > problem again. > > > > On startup, the card does not always initialise first time. > > It appears to > > bring up wlan0 successfully, and it appears to > > start wpa_supplicant successfully. However, the next step is > > to mount an NFS > > share. Sometimes it works first time, but usually it sits > > there for a while > > and then fails. If I then check iwconfig, it shows no Access > > Points, and 0 > > for Link Quality. I then run 'service network restart' and 'service > > wpa_supplicant restart' a couple of times, and it usually > > comes up on the > > second or third attempt. > > > > I read a message from Markus Kesaromous, on a related topic, that happened > to have the following line - > > "I set scan_ssid=1 [in wpa_supplicant.conf] because my router does not > broadcast the ssid." > > I have the same situation, so I have added that line to my .conf file, and > it seems to have solved the problem. > > Thanks, Markus ;-) > > Frank > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines Hotmail® has ever-growing storage! Don’t worry about storage limits. Check it out. |
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
