Hello list; I recently bought an Autumn Wave OnAir HDTV USSB tuner. I read the pvrusb2 driver setup information. I am logged in as "mick" KDE. In an xterm as root: [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Under F10 it fails with: [root@localhost ~]# tvtime Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /root/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. [root@localhost ~]# xawtv This is xawtv-3.95, running on Linux/x86_64 (2.6.27.21-170.2.56.fc10.x86_64) xinerama 0: 1440x900+0+0 WARNING: No DGA direct video mode for this display. can't open /dev/video0: No such file or directory v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: No such file or directory v4l: open /dev/video0: No such file or directory no video grabber device available [root@localhost ~]# kdetv /usr/bin/iceauth: creating new authority file /root/.ICEauthority kbuildsycoca running... ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL kdetv: could not connect to socket kdetv: No such file or directory [root@localhost ~]# v4l-conf v4l-conf: using X11 display :0.0 dga: version 2.0 WARNING: No DGA direct video mode for this display. mode: 1440x900, depth=24, bpp=32, bpl=5760, base=unknown can't open /dev/video0: No such file or directory [root@localhost ~]# ls -l /dev/video* ls: cannot access /dev/video*: No such file or directory [root@localhost ~]# depmod pvrusb2 WARNING: Can't read module pvrusb2: No such file or directory But: [root@localhost ~]# lsmod Module Size Used by pvrusb2 138896 0 dvb_core 84380 1 pvrusb2 cx2341x 19332 1 pvrusb2 v4l2_common 18560 2 pvrusb2,cx2341x videodev 40704 1 pvrusb2 v4l1_compat 21380 2 pvrusb2,videodev tveeprom 21508 1 pvrusb2 xt_limit 11140 8 iptable_mangle 11392 0 ipt_LOG 13828 8 ipt_MASQUERADE 11264 0 nf_nat 25496 1 ipt_MASQUERADE xt_DSCP 11776 0 nf_conntrack_irc 14392 0 nf_conntrack_ftp 16696 0 fuse 60992 2 bridge 56352 0 stp 10756 1 bridge bnep 21888 2 sco 19204 2 l2cap 28544 3 bnep bluetooth 59940 5 bnep,sco,l2cap sunrpc 191080 3 ip6t_REJECT 12160 2 nf_conntrack_ipv6 22984 2 ip6table_filter 11136 1 ip6_tables 26128 1 ip6table_filter ipv6 287784 38 ip6t_REJECT,nf_conntrack_ipv6 dm_multipath 23704 0 uinput 16128 0 snd_hda_intel 480032 4 snd_seq_dummy 11396 0 arc4 10240 2 snd_seq_oss 39232 0 ecb 11264 2 snd_seq_midi_event 14848 1 snd_seq_oss snd_seq 61968 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event crypto_blkcipher 24196 1 ecb snd_seq_device 15380 3 snd_seq_dummy,snd_seq_oss,snd_seq rt61pci 28288 0 snd_pcm_oss 52224 0 ata_generic 14084 0 rt2x00pci 14848 1 rt61pci rt2x00lib 43648 2 rt61pci,rt2x00pci snd_mixer_oss 23168 1 snd_pcm_oss snd_pcm 85640 2 snd_hda_intel,snd_pcm_oss rfkill 17188 1 rt2x00lib pata_acpi 13184 0 snd_timer 30352 2 snd_seq,snd_pcm snd_page_alloc 16656 2 snd_hda_intel,snd_pcm mac80211 214128 2 rt2x00pci,rt2x00lib snd_hwdep 16392 1 snd_hda_intel snd 68984 18 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep k8temp 13056 0 r8169 40964 0 hwmon 11064 1 k8temp cfg80211 32656 2 rt2x00lib,mac80211 i2c_piix4 18448 0 soundcore 14992 1 snd firewire_ohci 30468 0 pcspkr 11008 0 shpchp 38300 0 mii 13056 1 r8169 i2c_core 29216 4 pvrusb2,v4l2_common,tveeprom,i2c_piix4 firewire_core 45504 1 firewire_ohci eeprom_93cx6 10368 1 rt61pci pata_atiixp 13824 0 floppy 66216 0 wmi 14912 0 crc_itu_t 10240 2 rt61pci,firewire_core [root@localhost ~]# lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 11ba:1101 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I then downloaded the latest kernal from kernal.org, configured and compiled it When I boot it I get "cannot find /dev/root" Has anyone got this thing to work? How do you compile tyhe new kernels? Thanks Mick M. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
