G'day everyone, I've been working through a networking cookbook that obviously assumes some basic knowledge on networking ... that I don't have. So to humbly ask of the gurus here: When a firewall computer has 2 nics, they should be on separate subnets? Yes? When an ISP dynamically assigns an ip address, is it associated with the dsl router, eth0 where it plugs in, or the ppp0 device that does the communicating? So if eth1 goes to a lan and has its ip address configured in its ifcfg-eth1 and similarly eth0 on the wan side is configured to get its address from dhcp, is it the ISP's dhcp server that it needs to get the address from or the local dhcp server? With respect to the ip address for configuration of the dsl router (defaults to 192.168.1.1 for this Linksys AG300), which subnet should it be on, the lan side or wan? Slightly more advanced: What are the pros and cons of using an ifup ppp0 command from the firewall computer to connect with the ISP versus connecting from within the dsl router itself? Thanks in advance. -- Regards, Simon Slater Registered Linux User #463789. Be counted at: http://counter.li.org/ -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
