Mikkel L. Ellertson wrote: > Daniel B. Thurman wrote: > > > > The system: ClientPro, DX5000 has: > > > > (1) Intel `Outrigger' Dual 840 w/ Integrated Components Motherboard > > (1) PIII, 866Mhz, 133 FSB, 256K SECC2 > > RAM: (2) 64M x 18 (128MB) Samsung PC800, RIMM = 256MB > > > > [snip!] > > > Installing from the live CD will be a problem with 256MB of RAM. For > that matter, I am not sure you can do the GUI install with what you > have. On the other hand, you should be able to configure X and boot > in the GUI mode after you have it installed. Part of the problem > with installing from the live CD is that it takes extra memory to > uncompress things from the CD, and it also uses some RAM as a drive > to remember changes and added packages. Sorry for the email threading issue, I am not receiving emails directly as there is a problem somewhere at my email server end or my ISP end as posted in another topic. I suspected it had to be RAM limitations. Makes sense. I have another system with a slower processor (677MHz) but with more RAM (512M), and F10 installs quite smoothly. I guess the jump from F9 to F10 (Live CD) requires significantly more RAM space. I think I will install F9 but it may turn out to be very slow and with high disk swapping @ 256MB RAM. I'll find out soon enough! I guess I will have to budget later to add more RAM to the DX5000. The RIMMS are expensive and I'll need (2) 512M modules @ $59.95 ea or (2) 256MB modules @ $39.00 ea. The DX5000 requires two RAM modules, same-make, in order to function properly per specs. Thanks for confirming my suspicions! Dan -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
