I'm doing some embedded development and my flash programmer has a USB interface. Everything works fine if I program the device as root, but I'd like to be able to do it as a regular user. I get port permission errors if I try to run the programmer as a regular user. $ lsusb Bus 002 Device 003: ID 064e:a101 Suyin Corp. Laptop integrated WebCam Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 006: ID 15ba:0003 Olimex Ltd. OpenOCD JTAG Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 07ca:a321 AVerMedia Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub My programmer is the Olimex Ltd. OpenOCD JTAG device on bus 7. The documentation for the device says it needs access to /proc/bus/usb. I can allow regular user access by manually issuing a chown command for the port, but then I'd have to do it every time I reboot or unplug the programmer. How do I set it up to happen automatically in F10 ? Thanks ! -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
