On Thursday 11 December 2008, Craig White wrote: >On Thu, 2008-12-11 at 11:58 -0800, Donald Reader wrote: >> >try adding to /etc/modprobe.conf... >> > >> >alias net-pf-10 off >> > >> >and rebooting and that should shut off ipv6 everywhere >> >> Restarting network sure didn't help. I'll reboot, but that SHOULD have >> done it. >> >> >Craig >> >> What I did to turn off ipv6 was add "install ipv6 /bin/true" >> to my /etc/modprobe.d/modprobe.conf.dist file and now have no >> hint of ipv6 on my system. Basically followed the directions at >> http://www.g-loaded.eu/2008/05/12/how-to-disable-ipv6-in-fedora-and-centos >>/ >> >> YMMV > >---- >you are probably correct - as I said, I found out that my suggestion >wasn't working even for me but it's been a number of versions of Fedora >(and obviously kernel upgrades). > >Craig In my case, I had to build a kernel, 2.6.28-rc8, and disable all hints of ipv6 in the make xconfig screens. That worked. Amanda also worked last night, but didn't get to print the backup report for some reason. I just tested that particular printer profile & a cups test page looks fine to me. I also set cups to share, I assume via samba, the configured printers with the rest of the local nets machines. I thought I had that enabled before, but that was before I moved the rpmnew conf file into use. However, I still cannot use the Brother Laser printer. The only error message in the cups error_log is in the middle of a bunch of success lines. Maybe this makes sense? From the error_log, modify printer, print test page (and that returns success instantly on the jobs screen) Printer is an HL2140, rpms for it from Brother are installed. E [11/Dec/2008:23:35:51 -0500] CUPS-Add-Modify-Printer: Unauthorized (why is it unauthorized? This is a long standing error, since the FU8 install) I [11/Dec/2008:23:35:51 -0500] Setting lp3 device-uri to "usb://Brother/HL-2140%20series" (was "usb://Brother/HL-2140%20series".) I [11/Dec/2008:23:35:51 -0500] Setting lp3 printer-is-accepting-jobs to 1 (was 1.) I [11/Dec/2008:23:35:51 -0500] Setting lp3 printer-state to 3 (was 3.) W [11/Dec/2008:23:35:51 -0500] DNS-SD registration of "lp3" failed with -65537 Wth is this? I [11/Dec/2008:23:35:51 -0500] Saving printers.conf... I [11/Dec/2008:23:35:51 -0500] Printer "lp3" modified by "root". I [11/Dec/2008:23:35:57 -0500] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=21820) I [11/Dec/2008:23:35:57 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=21826) I [11/Dec/2008:23:36:04 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=21833) I [11/Dec/2008:23:36:21 -0500] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=21844) Wth is this DNS-SD? I've never before seen that, nor heard of the term. I've added the cups list, maybe Mike has some insight here. This printer has not worked since I installed Fedora Unity 8, August 2008 version, after a main drive failure. Everything but dbus is uptodate. I saw the error messages and have been holding that one back, I have enough stuff that doesn't work already. Thanks Craig, and anybody else with a clue. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Mal: "Don't f'in tell me what to goddamn do!" Kaylee: (laughing) "Goddamn do?" --"Serenity", outtakes -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
