On Saturday 29 November 2008 10:44:00 Kamisamanou Burgess wrote: > Open the terminal > Type: lspci > Copy it and send it to me/us > Type: dmesg > Copy it and send it to me/us > > P.S. - To anyone currently on the list, do he and I need to take care of > this within the list or between ourselves? > > Sayonara, > Kamisamanou Burgess > http://www.kamisamanou.net > > On Sat, Nov 29, 2008 at 04:12, Kevin Kempter <kevin@xxxxxxxxxxxxxxxxxxx>wrote: > > Hi All; > > > > I'm trying to instal Fedora10 on my new laptop but I've run into a few > > issues. > > > > It's a Dell Precision M6400 - I'm running KDE > > > > > > I have 2 issues: > > > > > > > > 1) I cannot get the full screen resolution > > I can go to administration --> display and under the 'Hardwae' tab I can > > configure the display as a generic or as a Dell 1920x1200 but no matter > > what > > I choose the 'Settings' tab only lets me choose a max of 1400x1050 > > > > 2) system notification sound works, and rhythmbox sound works but no > > other sound / players work such as amaok or Kaffiene > > > > Thanks in advance for any help ... > > > > _______________________________________________ > > Fedora-laptop-list mailing list > > Fedora-laptop-list@xxxxxxxxxx > > http://www.redhat.com/mailman/listinfo/fedora-laptop-list Below is the lspci and the dmesg output. Note I did install kmod-nvidia and now I can set the screen to 1600x1200 but I still cannot set it to 1920x1200 Thanks for the help... [root@Issac ~]# lspci 00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 02) 00:1f.2 RAID bus controller: Intel Corporation Mobile 82801 SATA RAID Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation Device 061e (rev a2) 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 03:01.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11) 03:01.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 03:01.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) 0c:00.0 Network controller: Intel Corporation Device 4232 # dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-117.fc10.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:58:53 EST 2008 Command line: ro root=UUID=015685e4-c218-4915-b766-69a7d0d58a77 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 00000000df451c00 (usable) BIOS-e820: 00000000df451c00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000320000000 (usable) last_pfn = 0x320000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xdf451 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 00df400000 page 2M 00df400000 - 00df451000 page 4k kernel direct mapping tables up to df451000 @ 8000-e000 last_map_addr: df451000 end: df451000 init_memory_mapping 0100000000 - 0320000000 page 2M kernel direct mapping tables up to 320000000 @ c000-1a000 last_map_addr: 320000000 end: 320000000 RAMDISK: 37cb1000 - 37fefb43 DMI 2.4 present. ACPI: RSDP 000FB9B0, 0024 (r2 DELL ) ACPI: XSDT DF454600, 006C (r1 DELL M09 27D80A1B ASL 61) ACPI: FACP DF45449C, 00F4 (r4 DELL M09 27D80A1B ASL 61) ACPI: DSDT DF454C00, 5AFA (r2 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS DF463400, 0040 ACPI: HPET DF454700, 0038 (r1 DELL M09 1 ASL 61) ACPI: ____ DF462C00, 0030 (r1 DELL M09 27D80A1B ASL 61) ACPI: APIC DF454800, 0078 (r1 DELL M09 27D80A1B ASL 47) ACPI: ASF! DF454400, 0076 (r32 DELL M09 27D80A1B ASL 61) ACPI: MCFG DF4547C0, 003E (r16 DELL M09 27D80A1B ASL 61) ACPI: SLIC DF45489C, 0176 (r1 DELL M09 27D80A1B ASL 61) ACPI: TCPA DF454B00, 0032 (r1 0 ASL 0) ACPI: SSDT DF452B6F, 066C (r1 PmRef CpuPm 3000 INTL 20050624) No NUMA configuration found Faking a node at 0000000000000000-0000000320000000 Bootmem setup node 0 0000000000000000-0000000320000000 NODE_DATA [0000000000015000 - 0000000000029fff] bootmap [000000000002a000 - 000000000008dfff] pages 64 (7 early reservations) ==> bootmem [0000000000 - 0320000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000a2b20c] TEXT DATA BSS ==> [0000200000 - 0000a2b20c] #3 [0037cb1000 - 0037fefb43] RAMDISK ==> [0037cb1000 - 0037fefb43] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 0000015000] PGTABLE ==> [000000c000 - 0000015000] [ffffe20000000000-ffffe2000affffff] PMD -> [ffff880028200000-ffff880032bfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00320000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009b 0: 0x00000100 -> 0x000df451 0: 0x00100000 -> 0x00320000 On node 0 totalpages: 3142636 DMA zone: 1732 pages, LIFO batch:0 DMA32 zone: 896137 pages, LIFO batch:31 Normal zone: 2197760 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009b000 - 000000000009c000 PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000df451000 - 00000000df452000 PM: Registered nosave memory: 00000000df452000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:18000000) PERCPU: Allocating 65184 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095629 Policy zone: Normal Kernel command line: ro root=UUID=015685e4-c218-4915-b766-69a7d0d58a77 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 3058.957 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 12318068k/13107200k available (3300k kernel code, 252476k reserved, 1838k data, 1288k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.91 BogoMIPS (lpj=3058957) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Extreme CPU X9100 @ 3.06GHz stepping 06 Using local APIC timer interrupts. APIC timer calibration result 16624785 Detected 16.624 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6117.67 BogoMIPS (lpj=3058837) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Extreme CPU X9100 @ 3.06GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12235.58 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5904 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 17:16:07 Date: 11/29/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: Precision M6400 ACPI: DMI Product Version: ACPI: DMI Board Name: 0G841G ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 10/27/2008 ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx ACPI: If "acpi_osi=Linux" works better, please notify linux- acpi@xxxxxxxxxxxxxxx ACPI: SSDT DF463480, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [6f60, 6f7f] PCI: 0000:00:1a.1 reg 20 io port: [6f80, 6f9f] PCI: 0000:00:1a.2 reg 20 io port: [6fa0, 6fbf] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6ffc000, f6ffffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [6f00, 6f1f] PCI: 0000:00:1d.1 reg 20 io port: [6f20, 6f3f] PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.2 reg 10 io port: [6e70, 6e77] PCI: 0000:00:1f.2 reg 14 io port: [6e78, 6e7b] PCI: 0000:00:1f.2 reg 18 io port: [6e80, 6e87] PCI: 0000:00:1f.2 reg 1c io port: [6e88, 6e8b] PCI: 0000:00:1f.2 reg 20 io port: [6ea0, 6ebf] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fed1c800, fed1cfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 64bit mmio: [f6ffbf00, f6ffbfff] PCI: 0000:00:1f.3 reg 20 io port: [1100, 111f] PCI: 0000:01:00.0 reg 10 32bit mmio: [f5000000, f5ffffff] PCI: 0000:01:00.0 reg 14 64bit mmio: [e0000000, efffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [f2000000, f3ffffff] PCI: 0000:01:00.0 reg 24 io port: [df00, df7f] PCI: 0000:01:00.0 reg 30 32bit mmio: [f6e00000, f6e1ffff] PCI: bridge 0000:00:01.0 io port: [d000, dfff] PCI: bridge 0000:00:01.0 32bit mmio: [f2000000, f6efffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff] PCI: 0000:0c:00.0 reg 10 64bit mmio: [f1ffe000, f1ffffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [f1f00000, f1ffffff] PCI: bridge 0000:00:1c.3 io port: [c000, cfff] PCI: bridge 0000:00:1c.3 32bit mmio: [f1c00000, f1efffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff] PCI: 0000:09:00.0 reg 10 64bit mmio: [f1be0000, f1beffff] PCI: 0000:09:00.0 reg 18 64bit mmio: [f1bf0000, f1bfffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled PCI: bridge 0000:00:1c.5 32bit mmio: [f1b00000, f1bfffff] PCI: 0000:03:01.0 reg 10 32bit mmio: [0, fff] pci 0000:03:01.0: supports D1 pci 0000:03:01.0: supports D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled PCI: 0000:03:01.1 reg 10 32bit mmio: [f1aff800, f1afffff] pci 0000:03:01.1: supports D1 pci 0000:03:01.1: supports D2 pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.1: PME# disabled PCI: 0000:03:01.2 reg 10 32bit mmio: [f1aff400, f1aff4ff] pci 0000:03:01.2: supports D1 pci 0000:03:01.2: supports D2 pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.2: PME# disabled PCI: 0000:03:01.3 reg 10 32bit mmio: [f1aff500, f1aff5ff] pci 0000:03:01.3: supports D1 pci 0000:03:01.3: supports D2 pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.3: PME# disabled PCI: 0000:03:01.4 reg 10 32bit mmio: [f1aff600, f1aff6ff] pci 0000:03:01.4: supports D1 pci 0000:03:01.4: supports D2 pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.4: PME# disabled PCI: 0000:03:01.5 reg 10 32bit mmio: [f1aff700, f1aff7ff] pci 0000:03:01.5: supports D1 pci 0000:03:01.5: supports D2 pci 0000:03:01.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.5: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [f1a00000, f1afffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3 ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:09: ioport range 0xcb0-0xcbb has been reserved system 00:09: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:0a: ioport range 0x900-0x92f has been reserved system 00:0a: ioport range 0x931-0x933 has been reserved system 00:0a: ioport range 0x935-0x97f has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x1000-0x1005 has been reserved system 00:0a: ioport range 0x1008-0x100f has been reserved system 00:0b: ioport range 0xf400-0xf4fe has been reserved system 00:0b: ioport range 0x1006-0x1007 has been reserved system 00:0b: ioport range 0x100a-0x1059 could not be reserved system 00:0b: ioport range 0x1080-0x10bf has been reserved system 00:0b: ioport range 0x1100-0x111f has been reserved system 00:0b: ioport range 0x1010-0x102f has been reserved system 00:0b: ioport range 0x809-0x809 has been reserved system 00:0c: iomem range 0x0-0x9efff could not be reserved system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xd3fff has been reserved system 00:0c: iomem range 0xe0000-0xfffff has been reserved system 00:0c: iomem range 0x100000-0xdf451bff could not be reserved system 00:0c: iomem range 0xdf451c00-0xdfefffff could not be reserved system 00:0c: iomem range 0xdff00000-0xdfffffff could not be reserved system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0c: iomem range 0xfeda0000-0xfeda3fff could not be reserved system 00:0c: iomem range 0xfeda4000-0xfeda4fff could not be reserved system 00:0c: iomem range 0xfeda5000-0xfeda5fff could not be reserved system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved system 00:0c: iomem range 0xfed18000-0xfed1bfff could not be reserved system 00:0c: iomem range 0xf8000000-0xfbffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e pci 0000:00:1c.3: IO window: 0xc000-0xcfff pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 pci 0000:03:01.0: IO window: 0x002000-0x0020ff pci 0000:03:01.0: IO window: 0x002400-0x0024ff pci 0000:03:01.0: PREFETCH window: 0x320000000-0x323ffffff pci 0000:03:01.0: MEM window: 0x324000000-0x327ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff pci 0000:00:1e.0: PREFETCH window: 0x00000320000000-0x00000323ffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [d000, dfff] bus: 01 index 1 mmio: [f2000000, f6efffff] bus: 01 index 2 mmio: [e0000000, efffffff] bus: 01 index 3 mmio: [0, 0] bus: 0b index 0 mmio: [0, 0] bus: 0b index 1 mmio: [0, 0] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [f1f00000, f1ffffff] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 mmio: [0, 0] bus: 0d index 0 mmio: [0, 0] bus: 0d index 1 mmio: [0, 0] bus: 0d index 2 mmio: [0, 0] bus: 0d index 3 mmio: [0, 0] bus: 0e index 0 io port: [c000, cfff] bus: 0e index 1 mmio: [f1c00000, f1efffff] bus: 0e index 2 mmio: [f0000000, f01fffff] bus: 0e index 3 mmio: [0, 0] bus: 10 index 0 mmio: [0, 0] bus: 10 index 1 mmio: [0, 0] bus: 10 index 2 mmio: [0, 0] bus: 10 index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [f1b00000, f1bfffff] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [f1a00000, f1afffff] bus: 03 index 2 mmio: [320000000, 323ffffff] bus: 03 index 3 io port: [0, ffff] bus: 03 index 4 mmio: [0, ffffffffffffffff] bus: 04 index 0 io port: [2000, 20ff] bus: 04 index 1 io port: [2400, 24ff] bus: 04 index 2 mmio: [320000000, 323ffffff] bus: 04 index 3 mmio: [324000000, 327ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 3322k freed audit: initializing netlink socket (disabled) type=2000 audit(1227978967.528:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 24065 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: SSDT DF4531DB, 023F (r1 PmRef BspIst 3000 INTL 20050624) ACPI: SSDT DF4535F1, 05C6 (r1 PmRef BspCst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT DF45341A, 01D7 (r1 PmRef ApIst 3000 INTL 20050624) ACPI: SSDT DF453BB7, 008D (r1 PmRef ApCst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (46 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 19 ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 19 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST9320421ASG, DE14, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133 ata2.00: configured for UDMA/133 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-8: ST9320421ASG, DE14, max UDMA/133 ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST9320421ASG DE14 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 scsi 4:0:0:0: Direct-Access ATA ST9320421ASG DE14 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 4:0:0:0: [sdb] Attached SCSI disk sd 4:0:0:0: Attached scsi generic sg2 type 0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 3 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-6: configuration #1 chosen from 1 choice usb 1-6: New USB device found, idVendor=05ca, idProduct=18a0 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=9 usb 1-6: Product: Integrated Webcam usb 1-6: Manufacturer: Ricoh co. Ltd. usb 1-6: SerialNumber: CN0TX6137248788IACBK usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #0 chosen from 1 choice usb 5-1: config 0 descriptor?? usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: 5880 usb 5-1: Manufacturer: Broadcom Corp usb 5-1: SerialNumber: 0123456789ABCD usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27.5-117.fc10.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. usb 7-1: new full speed USB device using uhci_hcd and address 2 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm- devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usb 7-1: configuration #1 chosen from 1 choice usb 7-1: New USB device found, idVendor=046d, idProduct=c526 usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: USB Receiver usb 7-1: Manufacturer: Logitech usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input5 input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input6 input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 0:733:290 usb_endpoint usbdev5.1_ep00: hash matches tty tty23: hash matches Freeing unused kernel memory: 1288k freed Write protecting the kernel read-only data: 4744k Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd44791/0xf0040d serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Clocksource tsc unstable (delta = -191854244 ns) type=1404 audit(1227978973.130:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 109081 rules. SELinux: 8192 avtab hash slots, 109081 rules. SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats SELinux: 73 classes, 109081 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1227978973.306:3): policy loaded auid=4294967295 ses=4294967295 udevd version 127 started ACPI: AC Adapter [AC] (on-line) ACPI: WMI: Mapper loaded ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:03:01.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. input: PC Speaker as /devices/platform/pcspkr/input/input8 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman tg3.c:v3.94 (August 14, 2008) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95761e) rev 5761100 PHY(5761)] (PCI Express) 10/100/1000Base-T Ethernet 00:21:70:8a:95:ce eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:03:01.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 Registered led device: mmc0 mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA ACPI: Battery Slot [BAT0] (battery present) input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input9 acpi device:36: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/device:34/input/input10 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) firewire_ohci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 Linux video capture interface: v2.00 firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10 Yenta: CardBus bridge found at 0000:03:01.0 [1028:0251] uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0) input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff pcmcia: parent PCI bridge Memory window: 0x320000000 - 0x323ffffff iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0c:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0xb, fmic=0xe, line=0x0, fline=0x0, cd=0x0, aux=0x0 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:0c:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' nvidia: module license 'NVIDIA' taints kernel. firewire_core: created device fw0: GUID 484fc0000e4ad9e1, S400 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.82 Tue Nov 4 16:50:05 PST 2008 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 8385920k swap on /dev/sda2. Priority:-1 extents:1 across:8385920k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx> firmware: requesting intel-ucode/06-17-06 firmware: requesting intel-ucode/06-17-06 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) firmware: requesting iwlwifi-5000-1.ucode Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready CE: hpet increasing min_delta_ns to 15000 nsec CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 fuse init (API version 7.9) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present CE: hpet increasing min_delta_ns to 22500 nsec CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CE: hpet increasing min_delta_ns to 33750 nsec CE: hpet increasing min_delta_ns to 50624 nsec SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 wlan0: authenticate with AP 00:1f:33:7e:7b:8a wlan0: authenticated wlan0: associate with AP 00:1f:33:7e:7b:8a wlan0: RX AssocResp from 00:1f:33:7e:7b:8a (capab=0x431 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present tg3: eth0: Link is down. uvcvideo: Failed to query (1) UVC control 9 (unit 2) : -32 (exp. 2). -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
