My bad, I meant for the Virtual line: Virtual 1024 768 > Hi, > > Alright, well, let's try this: > > In your new xorg file change this: > > #Option "NoAccel" > > To: > > Option "NoAccel" > > And: > >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> EndSubSection > > To: > > SubSection "Display" > Viewport 0 0 > Depth 24 > Virtual 1024 1024 > EndSubSection > > And reload/reboot. Hope it works! > >> Hi Steve and Jim, >> I was able to boot into shell with run level 3. >> I have already updated my system by doing 'yum update'. >> >> On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim@xxxxxxxxxxxxx> wrote: >>> Hi there, >>> >>> Got the same issue. Fix was easy. >>> >>> X -configure >>> >>> Makes a xorg.conf file in /etc/X11 >> :( It is not creating file in /etc/X11. It creating a file >> '/root/xorg.conf.new' and asking me to test with command: >> X -config <filename> >> Anyway this is not working. >> >> My system's configuration is: >> Graphics Adapter: Intel 82845G >> Monitor: ViewSonic VE510s >> Motherboard: Intel D845GVSR >> >> I have collected the log while running 'X -configure' >> >> [...snip...] >> X.Org X Server 1.5.3 >> Release Date: 5 November 2008 >> X Protocol Version 11, Revision 0 >> Build Operating System: Linux 2.6.18-92.1.10.el5 i686 >> Current Operating System: Linux localhost.localdomain >> 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686 >> Build Date: 16 November 2008 08:29:02PM >> Build ID: xorg-x11-server 1.5.3-5.fc10 >> Before reporting problems, check http://wiki.x.org >> to make sure that you have the latest version. >> Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008 >> List of video drivers: >> i740 >> rendition >> siliconmotion >> voodoo >> ati >> savage >> i810 >> sis >> neomagic >> trident >> mga >> v4l >> openchrome >> nv >> i128 >> vmware >> s3virge >> glint >> nouveau >> ast >> cirrus >> radeon >> tdfx >> apm >> r128 >> intel >> geode >> sisusb >> ztv >> amd >> mach64 >> dummy >> fbdev >> vesa >> (++) Using config file: "/root/xorg.conf.new" >> >> >> Xorg detected your mouse at device /dev/input/mice. >> Please check your config if the mouse is still not >> operational, as by default Xorg tries to autodetect >> the protocol. >> >> Your xorg.conf file is /root/xorg.conf.new >> >> To test the server, run 'X -config /root/xorg.conf.new' >> >> [...snip...] >> >> >> Here I am pasting my working Fedora 9 xorg.conf >> >> [...snip...] >> # Xorg configuration created by system-config-display >> >> Section "ServerLayout" >> Identifier "single head configuration" >> Screen 0 "Screen0" 0 0 >> InputDevice "Keyboard0" "CoreKeyboard" >> EndSection >> >> Section "InputDevice" >> >> # keyboard added by rhpxl >> Identifier "Keyboard0" >> Driver "kbd" >> Option "XkbModel" "pc105" >> Option "XkbLayout" "us" >> EndSection >> >> Section "Device" >> Identifier "Videocard0" >> Driver "intel" >> EndSection >> >> Section "Screen" >> Identifier "Screen0" >> Device "Videocard0" >> DefaultDepth 24 >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> Modes "1024x768" "800x600" "640x480" >> EndSubSection >> EndSection >> >> [...snip...] >> >> >> Here I am pasting my new Fedora 10 xorg.conf.new file generated by >> running 'X -configure' >> >> [...snip...] >> >> Section "ServerLayout" >> Identifier "X.org Configured" >> Screen 0 "Screen0" 0 0 >> InputDevice "Mouse0" "CorePointer" >> InputDevice "Keyboard0" "CoreKeyboard" >> EndSection >> >> Section "Files" >> ModulePath "/usr/lib/xorg/modules" >> FontPath "catalogue:/etc/X11/fontpath.d" >> FontPath "built-ins" >> EndSection >> >> Section "Module" >> Load "glx" >> Load "dbe" >> Load "extmod" >> Load "dri" >> EndSection >> >> Section "InputDevice" >> Identifier "Keyboard0" >> Driver "kbd" >> EndSection >> >> Section "InputDevice" >> Identifier "Mouse0" >> Driver "mouse" >> Option "Protocol" "auto" >> Option "Device" "/dev/input/mice" >> Option "ZAxisMapping" "4 5 6 7" >> EndSection >> >> Section "Monitor" >> Identifier "Monitor0" >> VendorName "Monitor Vendor" >> ModelName "Monitor Model" >> EndSection >> >> Section "Device" >> ### Available Driver options are:- >> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", >> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" >> ### [arg]: arg optional >> #Option "NoAccel" # [<bool>] >> #Option "SWcursor" # [<bool>] >> #Option "ColorKey" # <i> >> #Option "CacheLines" # <i> >> #Option "Dac6Bit" # [<bool>] >> #Option "DRI" # [<bool>] >> #Option "NoDDC" # [<bool>] >> #Option "ShowCache" # [<bool>] >> #Option "XvMCSurfaces" # <i> >> #Option "PageFlip" # [<bool>] >> Identifier "Card0" >> Driver "intel" >> VendorName "Intel Corporation" >> BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics >> Device" >> BusID "PCI:0:2:0" >> EndSection >> >> Section "Screen" >> Identifier "Screen0" >> Device "Card0" >> Monitor "Monitor0" >> SubSection "Display" >> Viewport 0 0 >> Depth 1 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 4 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 8 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 15 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 16 >> EndSubSection >> SubSection "Display" >> Viewport 0 0 >> Depth 24 >> EndSubSection >> EndSection >> >> [...snip...] >> >> Thanks, >> Anoop >> >>> >>> Then try to change some settings like: >>> >>> Option "NoAccel" >>> >>> Or disable DRI etc... >>> >>> Before you can type these command's you need the console before it >>> crashes >>> to X. >>> You need to single boot the system (or init 3), so in grub, get the >>> line: >>> >>> In grub menu: >>> Type: >>> e >>> and e again on this line: >>> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single >>> >>> The Enter to save for this moment, and then type "b". >>> >>> If you have a Intel 965 and below chipset, remember, you virtual >>> desktop >>> cannot be larger then 2048X2048 with Acceleration. But it's maybe >>> easyer >>> if you send the hardware information. >>> >>> Good luck! >>> >>> Greetings, >>> Jim. >>> >>>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop.chargotra@xxxxxxxxx> >>>> wrote: >>>>> Hi List, >>>>> I installed F10 in text mode from F10 DVD. Graphical mode >>>>> was giving issues, like sometimes system was freezing and on other >>>>> occasions I was just able to move the mouse cursor. >>>>> Installation went fine but when booted, I encountered same problem. I >>>>> could not see anything on console, though there was a progress bar at >>>>> the bottom of the screen going from left corner to right corner. I am >>>>> able to see login screen sometimes and on other occasions screen is >>>>> blur. Sometimes mouse gets stuck. >>>>> I was able to login once, but GUI freezed, though I was able to move >>>>> mouse cursor. After this, my login screen is not at all responsive. >>>>> It >>>>> is showing me two option. reboot or shutdown but I am not able to do >>>>> any. >>>>> >>>>> Till yesterday my F9 works like charm with full yum updates. >>>>> >>>>> Any help in this regard will be highly appreciated. >>>>> >>>> >>>> Can you do Alt+F2 and login to the console? >>>> >>>> If you can, install updates and reboot. >>>> >>>> Also, what hardware -- graphics, motherboard etc? >>>> >>>> Steve >>>> >>>> -- >>>> fedora-list mailing list >>>> fedora-list@xxxxxxxxxx >>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >>>> Guidelines: >>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >>>> >>> >>> -- >>> fedora-list mailing list >>> fedora-list@xxxxxxxxxx >>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >>> Guidelines: >>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >>> >> > > -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
