Re: set up NAT (network address translation) on local server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It appears from your email that there was an editing error at the COMMIT or line after. Perhaps instead of a line-end on those lines it has spaces and wrapped them into one long line?
Could happen from copy and paste depending on circumstances.
Check that each rule is on its own line.

Antonio Olivares wrote:
How can I fix this?
I manually edited the file and I stopped service and now I get :

[root@localhost ~]# gedit /etc/sysconfig/iptables &
[1] 7697 [root@localhost ~]# service iptables stop
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Setting chains to policy ACCEPT: nat filter      [  OK  ]
iptables: Unloading modules:                               [  OK  ]
[1]+ Done gedit /etc/sysconfig/iptables [root@localhost ~]# service iptables restart
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Setting chains to policy ACCEPT: filter          [  OK  ]
iptables: Unloading modules:                               [  OK  ]
iptables: Applying firewall rules: Bad argument `COMMIT' Error occurred at line: 6 Try `iptables-restore -h' or 'iptables-restore --help' for more information. [FAILED] [root@localhost ~]# cat /etc/sysconfig/iptables *nat :PREROUTING ACCEPT [1:233] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j SNAT --to-source 10.154.19.210 COMMIT -A FORWARD -i eth1 -o eth0 -j ACCEPT -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT # manually added the changes 2008/11/20 # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT
[root@localhost ~]#

Thanks,

Antonio



--
  "A society grows great when old men plant trees whose shade they know
  they shall never sit in" - Greek Proverb

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux