Re: Reboot every 1 hour, 19 seconds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rodolfo Alcazar Portillo wrote, On 10/07/2008 11:00 AM:
Am Dienstag, den 07.10.2008, 09:48 -0500 schrieb Arthur Pemberton:
When was the last time you dismantled and cleaned the machine?

Arthur:

Three monts ago? Seems clean, though. - I changed the memory DIMMs.

Before or after the rebooting started?

- Disconnected the machine electrig plug. - Pushed RESET button for about a minute.
I repeat: since the power outage, it reboots every 1.00.19, approx.


tried coming up in single user mode and running something like:
e2fsck -y -c -k -v -C 0 /dev/rootdevice

yes, normally ext3 does not have problems with power drops and such, but it can over time build up some things that need cleaned up, and at a minimum a read-only media check can be a good thing {read-write is better, but takes a looooong time}.

Tim:
could not be a cron issue, that would lead to exactly 1 hour rebooting.
Every 3 reboots means 3 hours and a minute (look my previous logs).

How long does it to reboot? ~19 seconds?
How long does it take for the program that is getting started at 1 hour after the machine comes up, to use enough power|memory to cause a fault? ~19 seconds?

BTW been here and bought the tee shirt... My machine had a problem of using a little more current than the wires supplying it could carry, while trying to get cron.daily done and doing it's other work.

suggestion: bring the box up in runlevel 3 and come back to it about 58 minutes after you boot it, you might actually see the kernel give an OOPS or panic. [If you don't have the patience to do that, there is the option of setting up a serial console to another machine and logging the console there.]
reason for runlevel 3: so you see console messages instead of GDM.


# ls -l /etc/cron.hourly/
total 0

Means little, as if the machine has not been able to complete .daily or .weekly or .monthly in that time period, then it will start running those at ~1 hour after boot.

try:
 ls -ltr /var/spool/anacron/


# at -l
# uname -r
2.6.26.5-45.fc9.i686

--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux