Re: [Fwd: FC9 Network Config]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear All,

How can we enable the services of "syslog-ng" and "sysstat" in FC9 Text mode ?

Thanks,

Edward.

Olteanu Eugen wrote:
Ok you dont seem to have any problem with your modules..so you dont need to modify anything in modprobe.conf. This means your network is fine..

The ntsysv tools shows a list of services that are off or on at a normal reboot. Depending on what you use that computer for you might have more servers "on".

Here are the ones that I have "on":

acpid
avahi-daemon
cpuspeed
crond
gpm
haldaemon
httpd
iptables
irqbalance
mdmonitor
messagebus
mysqld
network
sshd
syslog-ng
sysstat
xinetd

Also you should know that if you have a graphical machine (kde/gnome) then you are in lvl 5. If you boot in text mode you are in lvl 3.
So I have all those services on in lvl 5. If you switch to lvl 3 there might be others on.



On Wed, Oct 1, 2008 at 3:20 PM, <edwardspl@xxxxxxxxxx> wrote:
Hello,

Sorry,
My means is "What service must be started-up by using ntsysv command line ?"
Then the tool of "system-config-network" is good for work ?

BTW:
[root@svr1 ~]# /etc/rc.d/init.d/network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down interface eth1:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                [  OK  ]
Bringing up interface eth1:                                [  OK  ]
[root@svr1 ~]#


Thanks.

Edward.

Olteanu Eugen wrote:
You dont need to stop anything..   What does : /etc/init.d/network start say?

On Wed, Oct 1, 2008 at 2:12 PM, <edwardspl@xxxxxxxxxx> wrote:
Hello,

Would you mind to tell me may be I have stop which startup services by ntsysv ?
Then the system-config-network can't be good for work ?


Thanks !

Edward.

Olteanu Eugen wrote:

Probably you broke smth in  there.. try to remove those 2 packets and then install them again  via yum.




On Wed, Oct 1, 2008 at 2:03 PM, <edwardspl@xxxxxxxxxx> wrote:
Hello,

Just running the tools :

Error in sys.excepthook:
                        Traceback (most recent call last):
                                                            File "/usr/sbin/system-config-network-tui", line 120, in <lambda>
                                                 PRG_NAME, PRG_VERSION)
                                                                         File "/usr/share/system-config-network/netconfpkg/exception.py", line 332, in handleException
          import gtk
                      File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 79, in <module>
                               _init()
                                        File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 67, in _init
                                              _gtk.init_check()
                                                               RuntimeError: could not open display

                   Original exception was:
                                          Traceback (most recent call last):
                                                                              File "/usr/sbin/system-config-network-tui", line 277, in <module>
                                                                   plist = getProfileList()
             File "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 651, in getProfileList
                                 __PFList.load()
                                                  File "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 88, in load
                                                           self.loadprof(pr, profdir)
                       File "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 101, in loadprof
                                     devicelist = NCDeviceList.getDeviceList()
                                                                                File "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 318, in getDeviceList
                  __DVList.load()
                                   File "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 78, in load
                                           hwlist = NCHardwareList.getHardwareList()
      File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 759, in getHardwareList
                            __HWList.load()
                                             File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 603, in load
                                                        self.updateFromSystem()
                                                                                 File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 483, in updateFromSystem
                        self.updateFromHal(hdellist)
                                                      File "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 447, in updateFromHal
                                                                          hal = NCBackendHal.NCBackendHal()
                             File "/usr/share/system-config-network/netconfpkg/NCBackendHal.py", line 30, in __init__
                                         self._dbusBus = dbus.SystemBus()
                                                                           File "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 200, in __new__
                                                                          private=private)
            File "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 106, in __new__
           bus = BusConnection.__new__(subclass, bus_type, mainloop=mainloop)
                                                                               File "/usr/lib/python2.5/site-packages/dbus/bus.py", line 125, in __new__
                                                                            bus = cls._new_for_bus(address_or_type, mainloop=mainloop)
                                                      dbus.exceptions.DBusException: org.freedesktop.DBus.Error.FileNotFound: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
                                                    [root@svr1 ~]#

And the tools seem hang....

Any solution for fixing this problems ?


Thanks !

Edward.

Olteanu Eugen wrote:
Launch : system-config-network-tui

On Wed, Oct 1, 2008 at 1:57 PM, <edwardspl@xxxxxxxxxx> wrote:
Hello,

Just checked the default system :

[root@svr1 ~]# rpm -qa | grep "system-config-network"
system-config-network-tui-1.5.7-1.fc9.noarch
system-config-network-1.5.7-1.fc9.noarch
[root@svr1 ~]#

So, what else I can do it ?

Thanks

Edward


Olteanu Eugen wrote:
yum install system-config-network.noarch system-config-network-tui.noarch

Then launch system-config-network-tui.


On Wed, Oct 1, 2008 at 1:46 PM, <edwardspl@xxxxxxxxxx> wrote:
Timothy Murphy wrote:
edwardspl@xxxxxxxxxx wrote:

  
After the installation of FC9...
I can't running the tool of "system-config-network" for configuring the
network setting...
    
...
  
For text mode....
How can we config the setting of Networking ?

I can modify the ifcfg-ethxxx files, but can't ti find out the
modprobe.conf file...

Any more help ?
    
I'm no expert, but I doubt if you are giving enough information
for any expert to help.
Eg are you running NetworkManager
("chkconfig --list | grep -i net")
What do you mean by "I cannot run system-config-network"?
What actually happens if you do try to run it?
Etc
  
Hello,

[root@svr1 ~]# chkconfig --list | grep -i net
NetworkManager  0:off   1:off   2:on    3:on    4:on    5:on    6:on
netconsole      0:off   1:off   2:off   3:on    4:off   5:off   6:on
netfs           0:off   1:off   2:off   3:off   4:on    5:on    6:off
netplugd        0:off   1:off   2:off   3:off   4:off   5:off   6:off
network         0:off   1:off   2:off   3:on    4:off   5:off   6:on
[root@svr1 ~]#

So, which services musted be started up and which packages must be installed, then we can use system-config-network ?

Thanks !

Edward.

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines





-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux