Re: Linksys WRT54G2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrew Robinson wrote:
> Rich Emberson wrote:
>> I run Fedora 9 (only, no windows or macs). I recently was given a
>> Linksys WRT54G2
>> Wireless-G broadband router with its installation CD (which according
>> to the
>> terse instructions has a windows and mac modes - of course no Linux).
>>
>> I want to use this as simply a wireless access point to my existing
>> LAN. I
>> already have a router and DSL internet connection.
>>
> The wireless router is self-contained. You do not need any software to
> work with it. The software on the CD gives Windows (and maybe Macs)
> utilities to measure wireless signal strength and stuff like that.
> 
> The router is configured by its internal web server. Others have noted
> that you access that at 192.168.1.1, no userid, and a password of
> "admin". That is if the subnet and password weren't changed by the
> previous owner. Others suggested ways around this. I do recommend using
> a wired connection to the router to configure it.
> 
I thought Linksys used admin as the user, and password as the
password by default. To reset the router to factory settings,
believe you need to hold the reset button for 30 to 60 seconds - not
just push it.

> The one issue I think you will run into is that with the Linksys
> software, the WRT54G2 will want to act as a router. It will perform its
> own NAT. You can cable it to the existing router, but then any wireless
> connections will be on a different network segment than your wired
> boxes. The two solutions I see are 1. replace the existing router with
> the WRT54G2, or 2. install alternate firmware that gives more
> functionality, like simply providing a wireless access point on an
> existing network segment.
> 
You can disable the DHCP server on the Linksys, and if you are
willing to give up one wired port, you can skip using the WAN port.
(I don't remember if this one will let you use it as an access
point, and use the WAN port.) You will have to assign a different IP
address to the router. It may be able to use DHCP to get its address.

Mikkel
-- 

  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!

Attachment: signature.asc
Description: OpenPGP digital signature

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux