Lukasz wrote: >I have exactly the same problem.:-? Did you find a solution? My problem was this: ----- I am having problems installing F9 on a machine with a SCSI RAID board DPT(i2o) SmartRaid V. What happens is that the installation procedure gives no problems, I can see the single disk produced from the three RAID-5 disks and I can partition, format and install everything, but when I reboot I get: Unable to access resume device (/dev/i2o/hda2) mount: could not find filesystem '/dev/root/' ------ And so on... I fixed this starting from the rescue disk doing a chroot to the original system and rebuilding the initrd with the option --preload=i2o_block. I don't know if this is the best way but it seems to work. GianPiero -- GianPiero Puccioni |Istituto dei Sistemi Complessi-CNR gianpiero.puccioni(AT)isc.cnr.it |Via Madonna del Piano, 10 T:+39 0555226682 F:+39 0555226683|50019 Sesto F. (Firenze) -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
