Hey list,
I'm trying to get the 380 USB 2.0 spacec@m to work, but so far I haven't
had much luck.
I've never tried getting an USB camera to work before, so I'm probably
missing out on RPM packages and whatnot.
When I plug the thing in my laptop it gives me the following in dmesg:
usb 1-5: USB disconnect, address 3
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0e96, idProduct=c001
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 PC Camera
usb 1-5: Manufacturer: APLUX
The output from lsusb is the following:
Bus 001 Device 003: ID 0e96:c001 Aplux Communications, Ltd TRUST 380
USB2 SPACEC@M
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical
Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I've tried running Cheese but the program didn't give me anything. It
just shows me some test-screen (guess that's the default screen).
Since the webcam is pretty old, I thought that there has to be a driver
somewhere that supports it. But I really have no idea which driver it
should be.
Does anyone have any ideas?
Regards, Gijs
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
