Tom Poe wrote:
Brian Chadwick wrote:
Tom Poe wrote:
Brian Chadwick wrote:
Tom Poe wrote:
I am running fc8, received gift of Quickcam Pro 9000, and need
help troubleshooting it. No response coming out of forum, so need
to expand options.
I need to run list of commands to identify what is happening, like
lsusb, etc. Any help to figure out, whether I'm set up, and
camera is faulty.
Tom
unplug the camera
then plug it back in again..
then tail -30 /var.log.messages
post the output here
Feb 17 17:13:21 localhost kernel: usb 1-2: USB disconnect, address 2
Feb 17 17:13:44 localhost kernel: usb 1-2: new high speed USB device
using ehci_hcd and address 3
Feb 17 17:13:44 localhost kernel: usb 1-2: configuration #1 chosen
from 1 choice
Feb 17 17:13:44 localhost kernel: ALSA sound/usb/usbaudio.c:2753:
3:3:1: add audio endpoint 0x86
Feb 17 17:13:44 localhost kernel: ALSA sound/usb/usbmixer.c:989: [5]
FU [Mic Capture Switch] ch = 1, val = 0/1/1
Feb 17 17:13:44 localhost kernel: ALSA sound/usb/usbmixer.c:989: [5]
FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Feb 17 17:13:45 localhost kernel: Linux video capture interface: v2.00
Feb 17 17:13:46 localhost kernel: uvcvideo: version magic
'2.6.23.15-137.fc8PAE SMP mod_unload 686 4KSTACKS ' should be
'2.6.24.2-1.rt1.3.fc8.ccrmart SMP preempt mod_unload 686 '
Feb 17 17:13:47 localhost kernel: ALSA sound/usb/usbaudio.c:1327:
setting usb interface 3:1
Feb 17 17:13:47 localhost pulseaudio[2720]: alsa-util.c: Device hw:1
doesn't support 44100 Hz, changed to 16000 Hz.
Feb 17 17:13:47 localhost pulseaudio[2720]: alsa-util.c: Device hw:1
doesn't support 2 channels, changed to 1.
[root@localhost tom]#
- - -[end /var/log/messages] - - -
Thanks, hope this is meaningful.
Tom
i am unfamiliar with uvcvideo ...
maybe this link will help
http://linux-uvc.berlios.de/
Brian: Thanks for the link. I'm working with:
http://openfacts.berlios.de/index-en.phtml?title=Linux+UVC
now. In the meantime, looks like I installed when booted to PAE
kernel, and was trying to run luvcview with planetccrma kernel. The
video is working when in PAE kernel. I'll now try to get steps to
control module loading and unloading (seems audio needs to load before
video).
Thanks, Tom
i would have thought that provided the modules are in the correct place
that the kernel would be able to load them automatically.
Glad you are making some progress though.
