Hi folks. I've installed FC7 onto a system that used to run FC5 no problems. However I now have one annoying problem. When I boot up or change to init 5 kdm displays and works fine. However, if I log out kdm fails to re-display. The screen displays 'Mode Not Supported' and the screen/kayboard etc. hangs. I can ssh from another box and reboot the computer which then displays the kdm properly again. I've re-run system-config-display a new times, and it detects the display adaptor and LCD screen correctly, but then comes up with 'Mode Not Supported' message again. Display: S3 Inc. VT8375 [ProSavage8 KM266/KL266] Monitor: Proview EM-170 detected as CY765 'yum update' says that the system is up to date Can anyone suggest possible solutions. Below is the /etc/X11/xorg.conf file. # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "altwin:left_meta_win" EndSection Section "Device" Identifier "Videocard0" Driver "savage" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection -- Gary Stainburn This email does not contain private or confidential material as it may be snooped on by interested government parties for unknown and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
