Dear All,
I have a problem with my wireless I can see but not connect even if I open the wireless router. I have read for 5 hours on all forums and I can not seem to find a solution that works. First I could not scan, now I can scan a see with Network Manager.
OS: Fedora 8
Kernel:
Wireless: Intel Pro Wireless 3945ABG on a Dell Inspirion 6400.
part of wpa-supplicant.log:
---------------------------------------
CTRL-EVENT-CONNECTED - Connection to 00:1b:11:d5:4b:54 completed (reauth) [id=0 id_str=]
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with 00:1b:11:d5:4b:54 (SSID='TEST' freq=2412 MHz)
Association request to the driver failed
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Authentication with 00:00:00:00:00:00 timed out.
Trying to associate with 00:1b:11:d5:4b:54 (SSID='TEST' freq=2412 MHz)
Association request to the driver failed
Associated with 00:1b:11:d5:4b:54
CTRL-EVENT-CONNECTED - Connection to 00:1b:11:d5:4b:54 completed (reauth) [id=0 id_str=]
Associated with 00:1b:11:d5:4b:54
CTRL-EVENT-CONNECTED - Connection to 00:1b:11:d5:4b:54 completed (reauth) [id=-1 id_str=]
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
-------------------------------------
iwconfig wlan0:
------------------------------------------------------------------------------------------------
wlan0 IEEE 802.11g ESSID:"TEST"
Mode:Managed Frequency:
2.412 GHz Access Point: 00:1B:11:D5:4B:54
Tx-Power=12 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
-------------------------------------------------------------------------------------------------
iwlist scan:
-------------------------------------------------------------------------------------------------
lo Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:1B:11:D5:4B:54
ESSID:"TEST"
Mode:Master
Channel:1
Frequency:
2.412 GHz (Channel 1)
Quality=92/100 Signal level=-39 dBm Noise level=-127 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:tsf=0000000803f9ca3d
Cell 02 - Address: 00:14:BF:A8:D8:E1
ESSID:"rinternet!"
Mode:Master
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=38/100 Signal level=-86 dBm Noise level=-127 dBm
Encryption key:on
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Extra:tsf=000001c426ea41a4
eth0 Interface doesn't support scanning.
------------------------------------------------------------------------------------------------
Anyone an idea how to fix this problem, I have tried heaps of suggestions from the forums, but I don't seem to get it to work. Any suggestions would be awesome, because this lap needs its wireless.
Kind regards,
Jorgen
--
Jorgen Schelleman - Tasmanian Elite Junior Development Coach
Personal:
1 Piccolo Street
Mornington, 7018
Tasmania, Australia
Web:
http://www.tasmaniandiving.org.au
http://www.diving.asn.au
mob: +64 (0)424 620 295
home: +64 (0)3 6248 5352
