Craig White wrote:
On Thu, 2007-12-13 at 09:23 +1000, david walcroft wrote:
Craig White wrote:
On Thu, 2007-12-13 at 09:08 +1000, david walcroft wrote:
david walcroft wrote:
Aaron Konstam wrote:
On Wed, 2007-12-12 at 09:11 +1000, david walcroft wrote:
I can restart cups by "service cups restart ( stopped) (restart)"
But on Thuderbird and Firefox they both lock up after clicking
the print button,I cannot start localhost to get to cups admin.
Thanks david
Reversing what I have said before now you can get the equivalent of
localhost:631 by running system-config-printer.
or use lpoptions and lpadmin.
--
=======================================================================
I'll burn my books. -- Christopher Marlowe
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@xxxxxxxxxxxxx
Pardon my ignorance but I don't know how to use these commands.
david
I've done a "rpm -e --nodeps cups" then "yum install cups" and got to
the point where
thunderbird and firefox send a print request to my HP PSC 2110 but is
not printed out.
I still cannot open "localhost 631" 'Unable to connect'.
----
how about in firefox...
http://localhost:631
?
Craig
comes up with "Unable to connect"
----
you are running firefox on the same computer that has the printer
attached to it right?
how about...
/sbin/service cups status
tail -n 20 /var/log/cups/error.log
Craig
[david@reddwarf ~]$ sudo /sbin/service cups status
cups: unrecognized service
[david@reddwarf ~]$
[david@reddwarf ~]$ sudo tail -n 20 /var/log/cups/error.log
tail: cannot open `/var/log/cups/error.log' for reading: No such file or
directory
[david@reddwarf ~]$
My /var/log/messages
Dec 13 09:40:36 reddwarf kernel: usb 2-1: new full speed USB device
using ohci_hcd and address 4
Dec 13 09:40:36 reddwarf kernel: usb 2-1: configuration #1 chosen from 1
choice
Dec 13 09:40:36 reddwarf kernel: usblp0: USB Bidirectional printer dev 4
if 1 alt 0 proto 2 vid 0x03F0 pid 0x2811
Dec 13 09:40:56 reddwarf kernel: usb 2-1: USB disconnect, address 4
Dec 13 09:40:56 reddwarf kernel: usblp0: removed
Dec 13 09:41:06 reddwarf kernel: usb 2-1: new full speed USB device
using ohci_hcd and address 5
Dec 13 09:41:06 reddwarf kernel: usb 2-1: configuration #1 chosen from 1
choice
Dec 13 09:41:06 reddwarf kernel: usblp0: USB Bidirectional printer dev 5
if 1 alt 0 proto 2 vid 0x03F0 pid 0x2811
david
