zhu blue wrote:
hello:
I recently added additional 160GB disk to my F8 system. and partitioned
it as a single partition.
but when I use "df" command to show my disk, it only show the size is
9.2G
on my Desktop. GNOME it can show the disk as 149.0Gb correctly.
how to fix this problem?
the following is my disk info.
---------------------------------------------------------------------
[root@pc1 ~]# df
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda7 ext3 38G 15G 22G 41% /
tmpfs tmpfs 474M 12K 474M 1% /dev/shm
/dev/sda9 ext3 66G 61G 1.3G 98% /home
/dev/sda5 vfat 25G 18G 7.1G 72% /media/disk
/dev/sdb1 ext3 9.2G 5.3G 3.5G 61% /media/disk-1
/dev/sda1 vfat 15G 8.3G 6.4G 57% /media/disk-2
/dev/sda6 ext3 38G 3.9G 33G 11% /media/_home
[root@pc1 ~]# fdisk /dev/sdb
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe2c5e2d5
Device Boot Start End Blocks Id System
/dev/sdb1 1 19457 156288321 83 Linux
Command (m for help): q
[root@pc1 ~]#
------------------------------------------------------------------
thanks,
zhu
I see nothing wrong. But you must transfer some or all of your
system to the new /dev/sdb hard drive. Do so with care.
Karl
--
Karl F. Larsen, AKA K5DI
Linux User
#450462 http://counter.li.org.
GPG DF28 8F18 94F8 D5C6 9E44 163F 7FD1 3D06 C325 DA40
