Robert L Cochran wrote: > Here is the audio device from lspci -vb: > > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller (rev 02) > Subsystem: Toshiba America Info Systems AC97 Data Fax SoftModem > with SmartCP > Flags: bus master, fast devsel, latency 0, IRQ 11 > Memory at 00000000d0340000 (64-bit, non-prefetchable) > Capabilities: [50] Power Management version 2 > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Capabilities: [70] Express Unknown type IRQ 0 > > > Here is the modprobe.conf: > > cat /etc/modprobe.conf > > alias eth0 e100 > alias scsi_hostadapter libata > alias scsi_hostadapter1 ata_piix > alias scsi_hostadapter2 qlogic_cs > alias snd-card-0 snd-hda-intel > options snd-card-0 index=0 > options snd-hda-intel index=0 > > > Any suggestions are appreciated. > > Thanks very much! > > Bob > If the advice other have given you does not solve the problem, you may need to specify a model as well. But I don't know witch one you would need. I used to use model=auto" on my A105-S4004 with FC6, but it does not give me the proper mixer controls on F8. When I have time, I need to play with the setting again. options snd-card-0 index=0 model=auto options snd-hda-intel index=0 model=auto With a configuration like yours, I am missing the PCM and Master controls, and the line control does strange things. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
