Thanks for the note. The major difference (except for the dropped mode
lines messages) in the log files is the system that doesn't work has
the following lines: enable montype: 2 (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): I2C device "VGA_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "VGA_DDC:ddc2" removed. (II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0 (II) RADEON(0): EDID for output VGA-0 (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed. (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed. (II) RADEON(0): I2C device "DVI_DDC:ddc2" registered at address 0xA0. (II) RADEON(0): I2C device "DVI_DDC:ddc2" removed. (II) RADEON(0): DDC Type: 2, Detected Monitor Type: 0 (II) RADEON(0): Detected Monitor Type: 0 (II) RADEON(0): EDID for output DVI-0 (WW) RADEON(0): DDC2/I2C is not properly initialized The kernel is a custom kernel and is identical for both systems. Do you get DDC2/I2C errors? Dan Bruno Wolff III wrote: On Mon, Nov 19, 2007 at 17:17:59 -0800, Dan Sawyer <dansawyer@xxxxxxxxxxxxx> wrote:With Fedora 8 the Virtual parameter in xorg.conf is no longer honored. The exact xorg.conf has worked correctly for many releases. Below is a snippet from xorg.conf:I am using the "virtual" parameter in my xorg.conf file and it seems to be working as expected. Xorg.0.log shows that some mode lines were dropped because of it.Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Virtual 1600 1200 Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection |