On Wed, 2007-11-14 at 11:58 +0100, Dario Lesca wrote: > I have 2 VM in vmware (f7 and f8) and the behavior of NM is different. > > All machine are: > o Up to date > o network + NetworkManager* set to on and start > o runlever 5 > o BOOTPROTO=dhcp in /etc/sysconfig/network-scripts/ifcfg-eth0 > > If I stop then start VM, from my laptop: > f7) I can access to VM via "ssh 10.1.1.7" (IP is set via DHCP) > f8) I cannot access to VM via "ssh 10.1.1.8" (IP is NOT set) > > Only if I login from vmware console in f8, f8 set IP via DHCP and > network work. > > Which of these two behaviors is correct? > It is possible configure f8 so that they behave like f7? > > Thank for reply > > -- > Dario Lesca <d.lesca@xxxxxxxxxx> generally you don't want network and NM running at the same time. -- ======================================================================= Chicken Little only has to be right once. ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@xxxxxxxxxxxxx
