Hello. I have r8169 integrated network card and it does not work on a F8. The symptoms are: 1. Another computer cant get IP address from this one. They are connected through switch. 2. LED on the switch is constantly blinking. Some files: # dmesg | grep r8169 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded # cat /etc/modprobe.conf | grep r8169 alias eth0 r8169 # /sbin/lspci | grep 8169 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) # /sbin/lsmod | grep r8169 r8169 27589 0 I have tried to build module from Realtek web site, but it does not build on F kernel: # make clean modules [skipped] make -C /lib/modules/2.6.23.1-42.fc8/build SUBDIRS=/home/knight/Desktop/r8169-6.003.00/src modules make[2]: Entering directory `/usr/src/kernels/2.6.23.1-42.fc8-i686' CC [M] /home/knight/Desktop/r8169-6.003.00/src/r8169_n.o /home/knight/Desktop/r8169-6.003.00/src/r8169_n.c:1056: error: unknown field 'get_perm_addr' specified in initializer /home/knight/Desktop/r8169-6.003.00/src/r8169_n.c:1056: error: 'ethtool_op_get_perm_addr' undeclared here (not in a function) /home/knight/Desktop/r8169-6.003.00/src/r8169_n.c: In function 'rtl8169_try_rx_copy': /home/knight/Desktop/r8169-6.003.00/src/r8169_n.c:2608: error: implicit declaration of function 'eth_copy_and_sum' make[3]: *** [/home/knight/Desktop/r8169-6.003.00/src/r8169_n.o] Error 1 [skipped] Thanks in advance. P.S. Network Card is perfectly working on Windows. Switch LED stops blinking when "Windows XP" screen appears (when drivers are loaded). -- С уважением, Кевац Марко Sincerely yours, Kevac Marko
