On Wednesday 03 October 2007, Karl Larsen wrote: > I have sure heard a LOT about security updates and I have had my own > problems. For years I thought the only thing necessary was a good root > password. This year I found out with ssh around you need a good password > for your own login name. My problem was caused by having a super poor > login password which was my last name. Since the login name was karl it > followed. Also: run ssh on some port other than 22. This is accomplished by editing /etc/ssh/sshd_config and /etc/sysconfig/iptables (to add the port to iptables, assuming you're running iptables). If you know the IP addresses from which you will always be connecting, then set your firewall (both on any external router as well as in /etc/sysconfig/iptables) to only allow the IP addresses you want. Just changing from port 22 to some other port (and 222 or 2222 aren't good ones; anything above 1024 is fair game) will eliminate 90% or more of your risk. Also, set up RSA key security and eliminate password-based logins. This is a fairly lengthy setup; I'm sure there's a HOWTO in the archives (I'm getting ready to go home for the day, and do't have time to type it in; if you can't find it anywhere, I can write one up fairly quickly, as I've set this up on several boxes). Some might say to just do this and not worry about the listening port change; I prefer multilayered security (why I run SELinux in enforcing/targete mode on servers) when possible. With a nonstandard port you do have to remember to use the -p parameter of ssh to connect (and the -P parameter of scp) but in my opinion it's worth it. -- Lamar Owen Chief Information Officer Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu
