On Fri, 2007-09-28 at 19:33 +0200, Tanguy Eric wrote: > I don't when the problem begin but my scanner worked fine when i first > install F-7. Now when i try to use it it's very very long ... > When i plug my usb scanner i obtain this in dmesg : > usb 3-3: new high speed USB device using ehci_hcd and address 2 > usb 3-3: configuration #1 chosen from 1 choice > When i launch xsane i can select my scanner and i obtain this in dmesg : > ppdev: user-space parallel port driver > ppdev0: registered pardevice > ppdev0: unregistered pardevice > ppdev1: claim the port first > ppdev2: claim the port first > ppdev3: claim the port first > usb 3-3: reset high speed USB device using ehci_hcd and address 2 > When i select my usb scanner in xsane, xsane spend at least 60s to be > operational and after that when i ask a scan xsane spend at least 60s > before beginning the scan. > > What could be the problem ? I had a problem where I had to open the lid in order for it to know there was something other than what I last scanned in it. Beats hell outa me, but that did the trick. It must have reset something. Ric -- ================================================ My father, Victor Moore (Vic) used to say: "There are two Great Sins in the world... ..the Sin of Ignorance, and the Sin of Stupidity. Only the former may be overcome." R.I.P. Dad. Linux user# 44256 Sign up at: http://counter.li.org/ http://www.sourceforge.net/projects/oar http://www.wayward4now.net <---down4now too ================================================
