Re: F7 sound not detected on swapping USB hard disk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2007/9/24, antonio montagnani <[email protected]>:
2007/9/24, Yunus <[email protected]>:
> > antonio montagnani wrote:
> >> 2007/9/23, Mikkel L. Ellertson <[email protected]>:
> >>> antonio montagnani wrote:
> >>>> After sound detection ny modprobe.conf file has been modified to:
> >>>>
> >>>> remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || > >>>> : ;
> >>>> }; /sbin/modprobe -r --ignore-remove snd-intel8x0
> >>> I would remove this line, and re-run sound detection. It will not
> >>> fix your problem, but this line is supposed to store the mixer
> >>> settings when your sound card module is removed. I believe this is
> >>> for your old sound card, and one should be created for your new
> >>> sound card.
> >>>
> >>
> >> I have removed this line but no new line is created and modprobe > >> looks
> >> llike herebelow
> >>
> >>>> alias eth0 tg3
> >>>>
> >>>> options snd cards_limit=8
> >>>> alias snd-card-0 snd-hda-intel
> >>>> options snd-hda-intel index=0
> >>>> alias snd-card-7 snd-usb-audio
> >>>> options snd-usb-audio index=7
> >>>>
> >>
> >> shall I add lines manually???
> >>
> > I wouldn't. I find it annoying - I would rather save the settings
> > when I have them set how I normally use them, not when the system
> > shuts down. I may have changed things for some program, but I want
> > my normal settings back the next time I boot.
> >
> >>> I am not sure why your USB sound device is set to be the 8th sound
> >>> card, but that should not cause a problem. What may be causing a
> >>> problem is that the snd-hda-intel module can have many
> >>> configurations depending on your hardware. You may need to do some
> >>> searching for the correct options. You may need to specify the > >>> model
> >>> or model=auto in the options line.
> >>>
> >> You mean by googling, don't you??? and model=auto in modprobe.conf
> >>
> > Googling, checking the web site for your laptop, maybe reading the
> > .pdf manuals, although they usually are not helpful for Linux.
> >
> > Yes, you would add the model option to the option line in
> > /etc/modprobe.conf.
> >
> > options snd-hda-intel index=0 model=auto
> > or
> > options snd-hda-intel index=0 model=ref
> >
> [....]
> >
> > Mikkel
> > --
>
> Hi  Mikkel,
>
> Do you think Antonia have the same problem i encountered on my Acer
> TravelMate 6291 Laptop which also using Intel HDA
>
> Sound problem on my Acer Laptop is solved by :
> 1. downloading dan installing ALSA driver I got from
> ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/
> 2. adding model=toshiba to  /etc/modprobe.conf
>          options snd-hda-intel index=0 model=toshiba
> Even though my laptop is actually acer (not toshiba).
>
>
> yunus (Linux Newbie)
>
>
> --
> fedora-list mailing list
> [email protected]
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>

I am on another computer now so I cannot post my modprobe.conf file
I added manually install/remoce and so-on line.
I added option=toshiba
I didn't download new driver from suse webpages
It didn't work.
Are any rpm driver around??
My chipset is Realtek 268

--
Antonio Montagnani
Skype : antoniomontag

I have seen that alsa-lib-1.0.15-0.2.rc2.fc8. is in development folder.
Shall it resolve my issue??? and what about pushing also in testing for F7??
--
Antonio Montagnani
Skype : antoniomontag
Hi Antonio,

Did you add option=toshiba or model=toshiba to /etc/modprobe.conf ? On my acer, I added manually below line (using text editor) to /etc/modprobe.conf
        options snd-hda-intel index=0 model=toshiba

I don't know rpm driver (I am sure that other users in this list know better than me). The way that I know to make my sound working only to do below steps (with gcc installed on my system): 1. extract alsa-driver-hg20070817.tar.bz2 ( downloaded from ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/ ) It must be newer version for this driver. This driver contains patch for Realtek. 2. read INSTALL file in alsa-driver-hg20070817 directory and run these commands (the last command needs root privilege):
   ./configure
   make
   make install
3. add the following line (add model=toshiba) manually using text editor to my /etc/modprobe.conf
   options snd-hda-intel index=0 model=toshiba
4. reboot my system
5. raising speaker volume using alsamixer and testing my sound.

That's all that I know.

yunus (linux newbie)

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux