Martin Marques wrote: > I've experienced problems with logouts (any user) on my FC6. Basically, > X crashes and I end up in a terminal. From there I can start X again > without a problem but on logout I don't get the kdm login screen. > > Looking at the logs I found something very peculiar: > > When starting X and kdm ffom boot I see this in the Xorg.0.log: > > (II) SAVAGE(0): [drm] bpp: 32 depth: 24 > (II) SAVAGE(0): [drm] Sarea 2200+284: 2484 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: Open failed > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: Open failed > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenByBusid: drmOpenMinor returns 6 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (II) SAVAGE(0): [drm] loaded kernel module for "savage" driver > (II) SAVAGE(0): [drm] DRM interface version 1.3 > (II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0" > (II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xe00fd000 > (II) SAVAGE(0): [drm] mapped SAREA 0xe00fd000 to 0xb7f11000 > (II) SAVAGE(0): [drm] framebuffer handle = 0xd0000000 > (II) SAVAGE(0): [drm] added 1 reserved context for kernel > (II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3116; Card > 0x5333/0x8d04] > > But when I logout and X has to restart I get this: > > (II) SAVAGE(0): [drm] bpp: 32 depth: 24 > (II) SAVAGE(0): [drm] Sarea 2200+284: 2484 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 6, (OK) > drmOpenByBusid: drmOpenMinor returns 6 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (II) SAVAGE(0): [drm] DRM interface version 1.0 > (II) SAVAGE(0): [drm] drmSetBusid failed (6, pci:0000:01:00.0), > Permission denied > (EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI. > (EE) SAVAGE(0): DRI isn't enabled > > Now, two things come up from here: > > 1) In the first boot it's using version 1.3 of DRM interface, while at > restart it uses 1.0. What can be wrong? > 2) There seems to be a permission error when trying to access the SAVAGE > card at the busid specified. > > Any clues? Maybe following the procedures in this link will help? http://dri.freedesktop.org/wiki/DriTroubleshooting > -- Greener's Law: Never argue with a man who buys ink by the barrel.
