HI Tony,
No, you don't need powerchute with apcupsd. Set up the scripts in /
etc/apcupsd to send alerts/pages/emails for the different events.
Then /etc/rc.d/init.d/apcupsd will provide the daemon when enabled
and started.
There's another package apcupsd-cgi which will provide a nice web
page where you can get graphics showing load/battery status/run time,
etc. - but I don't know if it's available in the CentOS repositories
(I'm currently running it on Fedora systems only).
Dave
On Aug 17, 2007, at 11:08 AM, tony.chamberlain@xxxxxxxxx wrote:
Thanks, that installed OK. Do I still need to use PowerChute, or
does this take its place?
-----Original Message-----
Message: 17
Date: Fri, 17 Aug 2007 10:44:37 -0400
From: Gavin David <dgavin@xxxxxxxxxxxxx>
Subject: Re: APC UPS
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Message-ID: <2E31BFA3-0EE8-4DA1-813A-9C2D130498C8@xxxxxxxxxxxxx>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Install apcupsd via yum - it supports USB. Set the following values
in /etc/apcupsd/apcupsd.conf:
UPSCABLE usb
UPSTYPE usb
DEVICE
The DEVICE setting has to be blank - the comments in the conf file
mention this. I have several of these UPSes that are monitored this
way.
Dave
On Aug 17, 2007, at 10:37 AM, tony.chamberlain@xxxxxxxxx wrote:
>
>
> -Anyone use an APC Uinterruptible Power Source BK 350 with Linux?
> There is an RJ45-USB cable, but they say the USB cable will not work
> with Linux, and I need an RJ45 to Serial cable. Thw software that
> goes with
> it (PowerChute for Linux) asks which serial port you want to use it
> with so it
> must need a serial port.
>
> I am using CentOS and there is pl2303 and usbserial, but that
> doesn't seem to recognize
> the USB port I plugged the machine into. However, hwbrowser shows
>
> American Power Conversion Back-UPS Pro 500/1000/1500
>
> under system devices, when the USB port is connected.
>
> Any idea how to access it through a serial port? I can't find /dev/
> ttyUSB*
> --
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
