Michael Klinosky wrote: > > Mikkel: >> It is hard to say without more information. Please post the output of: >> >> /sbin/ifconfig > > [root@d500 ~]# ifconfig > eth0 Link encap:Ethernet HWaddr 00:08:02:40:94:68 > inet addr:10.0.0.50 Bcast:10.0.0.255 Mask:255.255.255.0 > inet6 addr: fe80::208:2ff:fe40:9468/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:4745074 errors:0 dropped:0 overruns:0 frame:0 > TX packets:2730043 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:2545830161 (2.3 GiB) TX bytes:208370217 (198.7 MiB) > > You don't need the loopback, do you? > Nope >>> /sbin/route -n > > [root@d500 ~]# route -n > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 > eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 > eth0 > 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 > eth0 > This looks good. >>> cat /etc/resolv.conf > > ; generated by /sbin/dhclient-script > nameserver 10.0.0.2 > > 10.0.0.2 is my router. > That should be fine. Depending on your router, it probably will not resolve host names on the local network. >>> Also, can you ping 10.0.0.6? > > [mpk@d500 documents]$ ping 10.0.0.6 > PING 10.0.0.6 (10.0.0.6) 56(84) bytes of data. > 64 bytes from 10.0.0.6: icmp_seq=1 ttl=64 time=1.22 ms > Ok - there is a route to the host. Now that we know you can talk to 10.0.0.6. That means that 10.0.0.6 is not accepting the connection. That could be because of a firewall, or it could mean the service in not running. I don't think the r* services are running by default. Did you install portmap? Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
