On Thu, 2007-07-26 at 17:37 -0700, Les wrote: > typically stress testing is at 90C. I wouldn't recommend running one > that hot for very long, though. Probably about 60C or 120F would be > OK, much above that you will begin to see faults over time I would > expect. That also presumes an adequate cooler, and correctly functional temperature sensor. If the sensor is wrong, or the cooler is full of fluff, you can fry it all too easily. -- (This box runs FC5, my others run FC4 & FC6, in case that's important to the thread.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists.
