Am Sonntag, den 22.07.2007, 17:23 -0600 schrieb Aly Dharshi: > This maybe a off the tangent on, but you do have ConsoleKit running > right ? I found that after I turned this off I had difficulties in > mounting my USB stick I've tried this. ConsoleKit started/stoped makes no difference. USB HDD automounted, USB Stick not. On work i've tried with another stick. Don't works, but i get an error message: Gnome-Popup: Cannot mount volume. Error org.freedesktop.Hal.PermissionDenied. Details: Permission denied: Not in active session /var/log/messages: Jul 23 10:36:42 merlin kernel: usb 5-8: new high speed USB device using ehci_hcd and address 6 Jul 23 10:36:42 merlin kernel: usb 5-8: configuration #1 chosen from 1 choice Jul 23 10:36:42 merlin kernel: scsi4 : SCSI emulation for USB Mass Storage devices Jul 23 10:36:42 merlin NetworkManager: <info> Error getting killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported - Access type not supported Jul 23 10:36:47 merlin kernel: scsi 4:0:0:0: Direct-Access General USB Flash Disk 0.00 PQ: 0 ANSI: 2 Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] 983808 512-byte hardware sectors (504 MB) Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] Write Protect is off Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] Assuming drive cache: write through Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] 983808 512-byte hardware sectors (504 MB) Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] Write Protect is off Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] Assuming drive cache: write through Jul 23 10:36:47 merlin kernel: sdc: sdc1 Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: [sdc] Attached SCSI removable disk Jul 23 10:36:47 merlin kernel: sd 4:0:0:0: Attached scsi generic sg3 type 0 Jul 23 10:36:48 merlin NetworkManager: <info> Error getting killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported - Access type not supported Jul 23 10:37:24 merlin last message repeated 6 times
