On Wed, 18 Jul 2007 11:49:05 +0100, Andy Green wrote: [... > Yep. It's a bit of a rigmarole by hand. Use > > wpa_passphrase SSID >/etc/wpa_supplicant/wpa_supplicant.conf > > (where SSID is your WPA network name) and then type your WPA shared key > and hit enter. > > Then edit > > vi /etc/sysconfig/wpa_supplicant > > to this > > INTERFACES="-iwlan0" > DRIVERS="-Dwext" > > then > > service wpa_supplicant start > > you can monitor progress with > > iwevent > > apparently but I usually use > > dmesg | less > > repeatedly. Once it's associated, you need to give the interface an IP > by dhclient or directly by ifconfig. > > -Andy I did these things and clicked activate on Network Device Control. Here is the log: Jul 18 12:49:28 mbrc35 kernel: ndiswrapper (add_wep_key:798): adding encryption key 1 failed (C0010015) Jul 18 12:49:28 mbrc35 kernel: ndiswrapper (add_wep_key:798): adding encryption key 1 failed (C0010015) Jul 18 12:49:30 mbrc35 avahi-daemon[2944]: Joining mDNS multicast group on interface wlan0.IPv6 with address [good address]. Jul 18 12:49:30 mbrc35 avahi-daemon[2944]: New relevant interface wlan0.IPv6 for mDNS. Jul 18 12:49:30 mbrc35 avahi-daemon[2944]: Registering new address record for [good address] on wlan0.*. The Network Device Control continues to show "Inactive", although the router thinks it has a connection, with the key having been accepted. I think I may be looking at a collision between ndiswrapper and wpa_supplicant. I am thinking of again reinstalling the system, and trying without ndiswrapper. Any opinions on this? Thanks, Mike.
