On Fri, 6 Jul 2007, Thomas TS wrote: > Michael Hennebry wrote: > > I can't even get cdrecord -scanbus to work: > > [root@localhost sata]# cdrecord -scanbus > cdrecord -scanbus -dev=ATAPI Thanks. It worked, although ATA turned out to be better. When I get back from my camping trip, I might try to wade through bugzilla. [root@localhost etc]# cdrecord -scanbus -dev=ATAPI Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�g Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATAPI' devname: 'ATAPI' scsibus: -2 target: -2 lun: -2 Use of ATA is preferred over ATAPI. Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) 'SAMSUNG ' 'CD-ROM SC-152A ' 'CA06' Removable CD-ROM 0,1,0 1) 'TOSHIBA ' 'DVD-ROM SD-R5112' '1031' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) '' '' '' NON CCS Disk 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [root@localhost etc]# [root@localhost etc]# cdrecord -scanbus -dev=ATA Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�g Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). scsibus1: 1,0,0 100) 'SAMSUNG ' 'CD-ROM SC-152A ' 'CA06' Removable CD-ROM 1,1,0 101) 'TOSHIBA ' 'DVD-ROM SD-R5112' '1031' Removable CD-ROM 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [root@localhost etc]# cdrecord -dao dev=ATA:1,1,0 /tmp/camera.iso Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�g Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA:1,1,0' devname: 'ATA' scsibus: 1 target: 1 lun: 0 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'TOSHIBA ' Identifikation : 'DVD-ROM SD-R5112' Revision : '1031' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Starting to write CD/DVD at speed 16 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. trackno=0 Turning BURN-Free off cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Track 01: Total bytes read/written: 368613376/368613376 (179987 sectors). [root@localhost etc]# eject -- Mike hennebry@xxxxxxxxxxxxxxxxxxxxx "Horse guts never lie." -- Cherek Bear-Shoulders
