On Tuesday 26 June 2007 16:48, John Bowden wrote: > On Tuesday 26 June 2007 04:16:26 Richard England wrote: > > John Bowden wrote: > > > On Monday 25 June 2007 22:06:55 lostson wrote: > > >> On Mon, 2007-06-25 at 22:01 +0100, John Bowden wrote: > > >>> Hi Folks > > >>> Finely got round installing F7 on my box. Every thing went > > >>> relatively smooth, except for no sound from the sound card. only > > >>> system beeps. The Mother board is an Asrock K8NF6G VSTA /M /ASR. It > > >>> has got the Nvidia NF6100-405 Chipset. The Hardware browser tells me > > >>> its running the nvidia MCP61 driver. How do I get my sound card > > >>> working? > > >>> -- > > >>> Guy Fawkes, the only man to enter the house's of Parliament > > >>> with honest intentions, (he was going to blow them up!) > > >>> Registered Linux user number 414240 > > >> > > >> Silly question but did you go through alsa mixer and make sure all > > >> the appropriate switches are on, and adjust levels ? > > > > > > How do I do that? > > > > from the CLI > > > > alsamixer > > Done that all sliders are at the 100% mark. Still silence. Ok. All the sliders in alsamixer are at 100%. Have you checked the switches? For example, for my audigy2 soundblaster card, there is a switch marked "Audigy A" . With that muted I have no sound. Any sliders that have a box beneath them displaying "MM" are muted. Suspect ones are "Master", "PCM", etc. Of course, what you see on alsamixer varies from soundcard to soundcard, and can vary also depending on the distro, and the version of the distro. The M key toggles the state of the switches. For example I'm booted into Kubuntu, and the audigy2 soundblaster card, and the "PCM" control just has a slider, but other distros I use with this card show a switch on the "PCM" control. I'm not going to boot them all up just to confirm this, but it may be worth checking again that nothing important is muted. You could post the output of : cat /proc/asound/cards cat /proc/asound/version and /sbin/lsmod | grep snd Did the sound work ok with earlier FC versions on that machine? Over to you for the moment. Nigel.
