On Mon, Jun 04, 2007 at 09:17:12AM -0400, John W. Linville wrote: > First, the issue that lots of people are having...if you are getting > the "YOUR FIRMWARE IS TOO OLD" issue, I recommend that you follow > this procedure: > > # you need to be root > wget http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2 > tar -xjvf broadcom-wl-4.80.53.0.tar.bz2 > bcm43xx-fwcutter -w /lib/firmware/ broadcom-wl-4.80.53.0/kmod/wl_apsta.o > > That should fix things for most people. However, some people still > need/want to use the older driver even on devices that are (or should > be) supported by the newer driver. If you are in this situation, > I recommend this procedure: > > # save the file attached to this email as "bcm43xx-old-config" > # you need to be root > ./bcm43xx-old-config # left this part out... /etc/rc.local -- John W. Linville linville@xxxxxxxxxx
