Re: Cannot upgrade from FC6->F7. No upgrade option given in install screen.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Lou Spironello wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dear Group:

I'm 'having difficulty upgrading from FC6->F7.   I used the F7 recuse
CD  and the F7 DVD ISO in an attempt to
do a hard disk upgrade.  The DVD ISO passes the mediacheck.

I boot the F7 Rescue CD,  select the Install/upgrade from the initial
screen.

The "Searching for Installation" status box is displayed and then the
partitioning screen is displayed
with no option to select an upgrade install.   The following is a list
of particulars for this machine:

# pvscan
           No matching physical volumes found
# lvscan
           No volume groups found

# blkid

    /dev/hda1: LABEL="/boot1"
    UUID="d24b169a-8d91-4e9c-9821-205ac9cf0b42" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hda2: LABEL="/" UUID="38e17b63-7a70-4d26-9b7c-e5cdda9064a1"
    SEC_TYPE="ext2" TYPE="ext3"
    /dev/hda3: LABEL="/usr1"
    UUID="7bdfe636-fa05-4b00-8e64-1a7ca3cb41a9" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hda5: LABEL="SWAP-hda5" TYPE="swap"
    /dev/hda6: LABEL="/home"
    UUID="9122da36-fcf9-482c-978e-14219f46d0ac" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdb: LABEL="rescue Disc" TYPE="iso9660"
    /dev/hdc1: LABEL="hdc1"
    UUID="d81d7541-80cf-404d-bc0d-21fda2473752" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdc2: LABEL="hdc2"
    UUID="424d61f6-c4e9-43cb-bbf8-51eb38eea3b5" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdc3: LABEL="hdc3"
    UUID="b54505bd-c8c3-401a-8708-c72b38552bb8" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdd1: LABEL="hdd1"
    UUID="df29a431-ec30-4114-8202-035b0f6f3114" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdd2: LABEL="hdd2"
    UUID="f28f151c-5963-48be-8281-1b674094c428" SEC_TYPE="ext2"
    TYPE="ext3"
    /dev/hdd3: LABEL="hdd3"
    UUID="218acaa4-4778-4a9b-be33-18f3b3646396" SEC_TYPE="ext2"
    TYPE="ext3"

/etc/fstab

LABEL=/ / ext3 defaults 1 1 LABEL=/boot1 /boot ext3 defaults 1 2
    devpts                  /dev/pts                devpts
    gid=5,mode=620  0 0
tmpfs /dev/shm tmpfs defaults 0 0 LABEL=/home /home ext3 defaults 1 2 proc /proc proc defaults 0 0 sysfs /sys sysfs defaults 0 0 LABEL=/usr1 /usr ext3 defaults 1 2 LABEL=SWAP-hda5 swap swap defaults 0 0 /dev/hdc1 /mnt/d1 ext3 defaults 0 0 /dev/hdc2 /mnt/d2 ext3 defaults 0 0 /dev/hdc3 /mnt/d3 ext3 defaults 0 0 /dev/hdd1 /mnt/d4 ext3 defaults 0 0 /dev/hdd2 /mnt/d5 ext3 defaults 0 0 /dev/hdd3 /mnt/d6 ext3 defaults 0 0


fdisk -l /dev/hda

    Disk /dev/hda: 163.9 GB, 163928604672 bytes
    255 heads, 63 sectors/track, 19929 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

       Device Boot      Start         End      Blocks   Id  System
    /dev/hda1   *           1          25      200781   83  Linux
    /dev/hda2              26        6087    48693015   83  Linux
    /dev/hda3            6088       12167    48837600   83  Linux
    /dev/hda4           12168       19929    62348265    5  Extended
    /dev/hda5           12168       12411     1959898+  82  Linux swap
    / Solaris
    /dev/hda6           12412       19929    60388303+  83  Linux


Any ideas would be appreciated.

Thank you.
Regards,
Lou

You might comment out the entries in fstab which reference /dev/hdx devices. You seem to have labels for actual OS volumes so you should then be able to change the other /dev/hdx entries to their proper /dev/sdx references after the upgrade.

Jim


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux