On Fri, 01 Jun 2007 16:33:54 -0400
Mark Haney <mhaney@xxxxxxxxxxxxxxxx> wrote:
> Frank Cox wrote:
> > I just discovered that my CD writer (the only "removable drive" on this
> > machine) is missing after updating from F6 to F7. It's just a standard-issue
> > 52x IDE cd burner.
> >
> > How can I get it back?
> >
>
> Is there an old fstab sitting in /etc?
No, there is just one fstab here.
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
> What does dmesg say?
Linux version 2.6.21-1.3194.fc7 (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT
2007 BIOS-provided physical RAM map: sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end:
000000000009fc00 type: 1 copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end:
00000000000a0000 type: 2 copy_e820_map() start: 00000000000e6000 size:
000000000001a000 end: 0000000000100000 type: 2 copy_e820_map() start:
0000000000100000 size: 000000007de2fc00 end: 000000007df2fc00 type: 1
copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007df2fc00 size:
0000000000000400 end: 000000007df30000 type: 4 copy_e820_map() start:
000000007df30000 size: 0000000000010000 end: 000000007df40000 type: 3
copy_e820_map() start: 000000007df40000 size: 00000000000b0000 end:
000000007dff0000 type: 4 copy_e820_map() start: 000000007dff0000 size:
0000000000010000 end: 000000007e000000 type: 2 copy_e820_map() start:
00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fed13000 size: 0000000000007000 end:
00000000fed1a000 type: 2 copy_e820_map() start: 00000000fed1c000 size:
0000000000084000 end: 00000000feda0000 type: 2 BIOS-e820: 0000000000000000 -
000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820:
0000000000100000 - 000000007df2fc00 (usable) BIOS-e820: 000000007df2fc00 -
000000007df30000 (ACPI NVS) BIOS-e820: 000000007df30000 - 000000007df40000
(ACPI data) BIOS-e820: 000000007df40000 - 000000007dff0000 (ACPI NVS)
BIOS-e820: 000000007dff0000 - 000000007e000000 (reserved) BIOS-e820:
00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed13000 -
00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000feda0000
(reserved) 1119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 515887) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 515887
early_node_map[1] active PFN ranges
0: 0 -> 515887
On node 0 totalpages: 515887
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2238 pages used for memmap
HighMem zone: 284273 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F4EB0, 0014 (r0 ACPIAM)
ACPI: RSDT 7DF30000, 003C (r1 INTEL D915GMH 20050128 MSFT 97)
ACPI: FACP 7DF30200, 0081 (r2 INTEL D915GMH 20050128 MSFT 97)
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
ACPI: DSDT 7DF30440, 5BDF (r1 INTEL D915GMH 1 INTL 2002026)
ACPI: FACS 7DF40000, 0040
ACPI: APIC 7DF30390, 0068 (r1 INTEL D915GMH 20050128 MSFT 97)
ACPI: MCFG 7DF30400, 003C (r1 INTEL D915GMH 20050128 MSFT 97)
ACPI: ASF! 7DF36020, 0099 (r16 LEGEND I865PASF 1 INTL 2002026)
ACPI: TCPA 7DF360C0, 0034 (r1 INTEL TBLOEMID 1 MSFT 97)
ACPI: WDDT 7DF360F4, 0040 (r1 INTEL OEMWDDT 1 INTL 2002026)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:62000000)
Built 1 zonelists. Total pages: 511857
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c077c000 soft=c075c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.162 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2037568k/2063548k available (2066k kernel code, 24768k reserved, 1092k
data, 240k init, 1146044k highmem) virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc071b000 - 0xc0757000 ( 240 kB)
.data : 0xc0604a4a - 0xc0715cb4 (1092 kB)
.text : 0xc0400000 - 0xc0604a4a (2066 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6003.17 BogoMIPS (lpj=3001588)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d
00000000 00000000 monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d
00000000 00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c077d000 soft=c075d000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.34 BogoMIPS (lpj=2999671)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d
00000000 00000000 monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d
00000000 00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
Total of 2 processors activated (12002.51 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
migration_cost=110
Time: 18:08:57 Date: 04/31/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: Power Resource [URP2] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
pnp: 00:0c: ioport range 0x400-0x47f has been reserved
pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
pnp: 00:0c: ioport range 0x500-0x53f has been reserved
pnp: 00:0c: iomem range 0xeec00000-0xeec03fff could not be reserved
pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x7dffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ff400000-ff4fffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: ff800000-ff8fffff
PREFETCH window: d0400000-d04fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: ff700000-ff7fffff
PREFETCH window: d0300000-d03fffff
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: ff600000-ff6fffff
PREFETCH window: d0200000-d02fffff
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: ff500000-ff5fffff
PREFETCH window: d0100000-d01fffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: ff900000-ff9fffff
PREFETCH window: d0500000-d05fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3472k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1180634938.336:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 65F8109C338BBD41
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 915G Chipset.
agpgart: Detected 32508K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 7:298:141
hash matches device device:12
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 820k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
usb 2-1: new full speed USB device using uhci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffac4000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.20 loaded.
ata_piix 0000:00:1f.1: version 2.10ac1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
scsi0 : ata_piix
usb 5-3: new high speed USB device using ehci_hcd and address 2
usb 5-3: configuration #1 chosen from 1 choice
ata1.00: ATAPI, max UDMA/33
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech Logitech Cordless RumblePad 2 as /class/input/input3
Force feedback for Logitech force feedback devices by Johann Deneux
<johann.deneux@xxxxxxxx> input: USB HID v1.10 Gamepad [Logitech Logitech
Cordless RumblePad 2] on usb-0000:00:1d.1-2 ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1.00: limiting speed to UDMA/33:PIO3
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1.00: disabled
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x00010177
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 19
ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 19
scsi2 : ata_piix
ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
ata3.00: ATA-7: ST3300622AS, 3.AAD, max UDMA/133
ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
ata3.00: configured for UDMA/133
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0x0001e007
scsi 2:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA sda: sda1 sda2
sd 2:0:0:0: Attached scsi disk sda
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1180635045.320:2): selinux=0 auid=4294967295
input: PC Speaker as /class/input/input4
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
sd 2:0:0:0: Attached scsi generic sg0 type 0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 17 (level, low) -> IRQ 17
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1
proto 2 vid 0x03F0 pid 0x1C17 usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
fw_ohci: Added fw-ohci device 0000:06:05.0, OHCI version 1.0
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 21
e100: eth0: e100_probe: addr 0xff901000, irq 21, MAC addr 00:13:20:44:27:99
loop: loaded (max 8 devices)
fw_core: created new fw device fw0 (0 config rom retries)
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
No dock devices found.
ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: found ejectable bay
ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: Adding notify handler
ACPI: Bay [\_SB_.PCI0.IDE1.CHN1.DRV0] Added
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
[<c042b0cf>] local_bh_enable+0x45/0x92
[<c06002bd>] cond_resched_softirq+0x2c/0x42
[<c059adf3>] release_sock+0x4f/0x9d
[<c05cec7d>] tcp_send_ack+0xeb/0xef
[<c05c7755>] tcp_recvmsg+0x8d2/0x9de
[<c0480872>] core_sys_select+0x1ae/0x2f3
[<c059a7a9>] sock_common_recvmsg+0x3e/0x54
[<c0598839>] sock_aio_read+0xfc/0x108
[<c04753ea>] do_sync_readv_writev+0xc1/0xfe
[<c04755f8>] do_sync_read+0xc7/0x10a
[<c0436e71>] autoremove_wake_function+0x0/0x35
[<c059863b>] sock_aio_write+0x0/0x102
[<c04e7350>] copy_to_user+0x3c/0x50
[<c0475e99>] vfs_read+0xba/0x152
[<c04762db>] sys_read+0x41/0x67
[<c0404f70>] syscall_call+0x7/0xb
=======================
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:2031608k e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
nfs: server fileserver not responding, still trying
nfs: server fileserver OK
--
MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com
