Hi All,
I decided to build my brother a mythtv box to convert him from
windows, to using a decent pvr system.
It is built on FC6 with Fluxbox on a pentium III 500mhz. My first
mythtv was the same proccesor and it ran great.
He gave me his twinham bt878 DVB card but I keep running into problems
can someone help.
First off Myth says can not open card.
I checked /dev/video0 but ths does not exists. /dev/dvb does though
I have ran #modprobe -v dvb-bt8xx
output
-----------------------------------------------------------------------------------------------------------------------------
Mar 31 23:13:33 localhost kernel: DVB: registering new adapter (bttv0).
Mar 31 23:13:34 localhost kernel: dst(0) dst_get_device_id: Recognise [DTTDIG]
Mar 31 23:13:34 localhost kernel: DST type flags : 0x10 firmware version = 2
Mar 31 23:13:34 localhost kernel: dst(0) dst_get_mac: MAC Address=[00:08:ca:13:6
c:00]
Mar 31 23:13:34 localhost kernel: DVB: registering frontend 0 (DST DVB-T)...
#lspci -v
output
-----------------------------------------------------------------------------------------------------------------------------
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB card
Flags: bus master, medium devsel, latency 66, IRQ 17
Memory at 40400000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel version = 2.6.20-1.2933.fc6
Mythtv version = mythtv-0.20-154.fc6.at
Can anyone offer me help on what I need to do to create the video0 node
Has anyone got this working?
Paul
