On Sat, 2007-02-03 at 14:03 -0500, Negative wrote: > On 1/30/07, Gerhard Magnus <magnus@xxxxxxxxxxxxxxx> wrote: > I've been trying to get a Belkin USB KVM switch to work with > two FC6 > boxes. The top of the KVM unit has a pair of illuminated > buttons that > are used to manually switch the peripherals from one system to > the > other. It seems this would be straightforward but it's > not. The > keyboard, monitor and mouse work fine when just one system is > physically > plugged into the switch. But with both systems connected to > it the > switch seems to have a mind of its own and goes back and forth > between > the boxes as soon as I start using the keyboard or > mouse. Often both > buttons on the switch are illuminated, as if it were trying to > deal with > input from both systems. > > Has anyone had a problem like this? Is there a workaround? > > Thanks for the help! -- Jerry I had a similar problem when I replaced my roller/ball mouse that died with a new optical one. Went back to a roller/ball mouse and everything was fine again. Go figure. Fred
