Hi everyone! I have a little problem with FC6 running on an IBM xSeries 206m machine.. I can't get Xorg to detect the integrated video card (Radeon 7000/VE) using the ati driver, while with FC4 and 5 everything was ok.. The fbdev driver works though, but it's a bit slow. lspci output: --- 00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02) 00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) 00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) 00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) 00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) 00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02) 00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) 00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) 00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) 00:1f.2 RAID bus controller: Intel Corporation 6300ESB SATA RAID Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02) 02:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet Controller 04:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] --- Xorg log with ati driver (relevant parts, I hope :) ): --- X Window System Version 7.1.1 (...) Current Operating System: Linux Havens.ibc.it 2.6.18-1.2798.fc6 #1 SMP (...) Build ID: xorg-x11-server 1.1.1-47.fc6 (...) (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2578 card 1014,02ae rev 02 class 06,00,00 hdr 00 (II) PCI: 00:03:0: chip 8086,257b card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:06:0: chip 8086,257e card 0000,0000 rev 02 class 08,80,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,25ae card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,25a9 card 1014,02ad rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,25aa card 1014,02ad rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:4: chip 8086,25ab card 1014,02ad rev 02 class 08,80,00 hdr 00 (II) PCI: 00:1d:5: chip 8086,25ac card 1014,02ad rev 02 class 08,00,20 hdr 00 (II) PCI: 00:1d:7: chip 8086,25ad card 1014,02ad rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 0a class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,25a1 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,25a2 card 1014,02ad rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,25b0 card 1014,02ad rev 02 class 01,04,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,25a4 card 1014,02ad rev 02 class 0c,05,00 hdr 00 (II) PCI: 02:01:0: chip 8086,1075 card 1014,02ad rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (...) (II) Primary Device is: ISA (II) ATI: Candidate "Device" section "Videocard0". (EE) No devices detected. Fatal server error: no screens found --- Looking at the PCI scan, it seems like Xorg misses the device completely.. My xorg.conf Device section: --- Section "Device" Identifier "Videocard0" Driver "ati" VendorName "Videocard vendor" BoardName "ATI Radeon 7000" Option "NoAccel" EndSection --- I tried to install a new video card (ATI RageXL), but it doesn't detect it either.. What could be wrong? Many thanks for your attention, please ask if you need more information!
