Re: Starting Beryl crashs X

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2007-01-28 at 12:00 +0200, Dotan Cohen wrote:
> On 27/01/07, Chris Mohler <cr33dog@xxxxxxxxx> wrote:
> > > The machine is supposed to have a ATI x1400 viedo card, but I'm
> > > not certain that that's what I got (how can I check that).
> >
> > as root:
> > # lspci
> > or:
> > # lspci | grep -i ati
> >
> 
> Yup, that's what it is:
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400
> 
> 
> >
> >  > Should I change "vesa" to "radeon"? What else can I do? Thanks in advance.
> >
> > Yes - if X fails, check you have the xorg ati driver installed:
> > $ yum list *x*ati*
> > xorg-x11-drv-ati.i386                    6.6.3-1.fc6            installed
> >
> 
> It is already installed:
> Installed Packages
> xorg-x11-drv-ati.i386                    6.6.3-1.fc6            installed

Here's what Stanton Finley wrote:

If you are using an ATI video card or chipset type the following in the
root terminal: 
        yum -y --enablerepo livna install kmod-fglrx
        Hit enter. Wait for the installation to complete. (If you have
        an smp kernel use "yum -y --enablerepo livna install
        kmod-fglrx-smp" instead.) If you get an error with this
        procedure it probably means that your kernel is more recent than
        the kernels for which Livna has built ATI kernel modules. If
        this is the case switch to an older kernel (if you have one) on
        your Fedora boot menu or wait a few days until Livna gets the
        graphics acceleration module rpms built for the most recent
        kernel. When you update your kernel you will have to update your
        ATI driver as well. Do this with a "yum -y --enablerepo livna
        update kmod-fglrx" as root after you have booted into the new
        kernel. (Do not proceed until you have executed the two SELinux
        commands in the paragraph at the bottom of this secton.) 
      * If you got a message "FATAL: Could not
        rename /lib/modules/2.6.16-1.2111_FC5/modules.dep.temp
        into /lib/modules/2.6.16-1.2111_FC5/modules.dep: Permission
        denied" during installation type the following at the root
        prompt: 
        mv /lib/modules/2.6.16-1.2111_FC5/modules.dep.temp /lib/modules/2.6.16-1.2111_FC5/modules.dep
        Hit enter. When you see "overwrite
        `/lib/modules/2.6.16-1.2111_FC5/modules.dep'?" type "y" and hit
        enter.
        
        Ole Stanton was never wrong. :) Ric
        

-- 
================================================
My father, Victor Moore (Vic) used to say:
"There are two Great Sins in the world...
..the Sin of Ignorance, and the Sin of Stupidity.
Only the former may be overcome." R.I.P. Dad.
Linux user# 44256 Sign up at: http://counter.li.org/
http://www.sourceforge.net/projects/oar
http://www.wayward4now.net
================================================



[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux