Does anyone have diskless booting working with fc6 and could tell me what they did to get it to work? I have a diskless via epia M10K box, booting an fc4 image. Yesterday I upgraded the server it boots from from fc4 to fc6, reran system-config-netboot and successfully got it to boot as it had before, i.e. an fc4 image loaded over nfs. I then tried to create an fc6 boot image. I installed fc6 on a third machine and copied the files as described in the howto (and the system-config-netboot dialog). I changed the properties of the diskless box to use the fc6 image. This begins to boot, but then gets a kernel panic. The messages I see are like this: Ramdisk: compressed image found at block 0 time: acpi_pm clocksource has been installed EXT2-fs: blocksize too small for device grow-buffers: requested out-of-range block 10446744071562067960 for device ram0 isofs_fill_super: bread failed, dev=ram0, iso_blknum=17 block=2147483618 No filesystem could mount root, tried: ext2 iso9660 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) (the above was hand copied from a screenshot, so there may be typos) The kernel I chose was the current one for fedora 6 - kernel-2.6.18-1.2869.fc6.i686. Am I using the correct kernel? If not, what should I use? And did I miss something in the setup or have I found a bug? Any help will be gratefully received. Regards, Chris
