Hello,
I have i computer figuring as a router, on which i have 3 nics
installed. 2 working flawlessy, one is producing errors:
NETDEV WATCHDOG: eth1: transmit timed out
eth1: Transmit timeout, status 0d 0004 c07f media 00.
eth1: Tx queue start entry 4 dirty entry 0.
eth1: Tx descriptor 0 is 0008a0e5. (queue head)
eth1: Tx descriptor 1 is 0008a0de.
eth1: Tx descriptor 2 is 0008a0e5.
eth1: Tx descriptor 3 is 0008a0de.
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
i was googling, just finding something about interrupts. I changed the
interrupt of eth1 to 9 (acpi), no help.
can anybody figure out or has some hints that i could try?
my /proc/interrupts:
[root@trinity proc]# more interrupts
CPU0
0: 593132 XT-PIC timer
1: 952 XT-PIC i8042
2: 0 XT-PIC cascade
5: 1 XT-PIC CS4231
6: 5 XT-PIC floppy
7: 1 XT-PIC parport0
8: 1 XT-PIC rtc
9: 0 XT-PIC acpi
10: 1 XT-PIC eth1
11: 12470 XT-PIC uhci_hcd:usb1, eth0, eth2
12: 15173 XT-PIC i8042
14: 13840 XT-PIC ide0
15: 36367 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
so, i get some sun now, otherwise i get eyes like gollum :)
Thanks,
Roger
