Hey Guys, I was just installing Fedora Core 6 for a friend. And they use their machine as a tv (pci tv tuner). When I launch TvTime, it immediately fails. The output at the console level is bellow, no other output is apparent. Please advise a.s.a.p ----------------------------------------------------------------------------------------- Running tvtime 1.0.1. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/vashanti/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. [vashanti@Leonardo ~]$ less tvtime.error [vashanti@Leonardo ~]$ tvtime Running tvtime 1.0.1. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/vashanti/.tvtime/tvtime.xml xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. ----------------------------------------------------------------------------------------- -- Fedora Core 6 and proud
