People, I'm having some problems with a centrino notebook with Intel 915GM video chipset and FC6. If you can help me with any of these listed below, I would appreciate. 1. When I connect a monitor to the VGA connector of the notebook after activating it with i810switch, the output image is always bigger then the screen, no matter which resolution I choose. If the monitor offers the option to adjust the width and height of the image, that's ok, I can shrink it to make it fit the screen. But many LCD monitors allow only the repositioning of the image and with these I can't see all the all of the output image. I had FC5 installed in this notebook before FC6 and this problem did not exist. 2. Until FC5, I could always change X resolution using CTRL ALT + and CTRL ALT -. In FC6 this does not work. I don't have a "DontZoom" option in my xorg.conf, but I tried to add it with the value "false", even if this is the default, with no success. 3. I configure KDE to turn off the display after 20 minutes of inactivity. The display turns itself off after this time, but then the backlight turns on again after 10 seconds or so and the screen remains blank. If I command "xset dpms force off", the same thing happens: the display turns off and the backlight turns on again after 10 seconds. "vbetool dpms off", however, works as expected. Option "dpms" is set to "on" in xorg.conf. Is this a bug or a misconfiguration? 4. Anyone has tv-out working with the i810 xorg driver? Which settings are necessary in xorg.conf? 5. When I first installed FC6 in this notebook, suspend to RAM was working ok. Last week, after two or three weeks without updating the system, I run yumex and updated everything it was available for update and then suspend does not work anymore. It suspends, but the display won't come back when I resume. This always happened with kernel 2.6.17, but kernel 2.6.18 had solved the problem. The kernel was updated on my last update, but it doesn't seem to be the problem, as I have booted with the original FC6 kernel and suspend still doesn't work. Anyone else with this problem? Thanks, Marcelo
